Canon Speedlite Transmitter ST-E2

Print Canon Speedlite Transmitter ST-E2 pageRequest Bulk Pricing CAMCOR ITEM NO. 113006005 | MFG. PART NO. 2478A002
Canon Speedlite Transmitter ST-E2
Canon Speedlite Transmitter ST-E2
Zoom
Close WindowZoom
Alternate View

MSRP: 350.00
Savings: $21.01

Your Price: $328.99
Quantity

Product Highlights
Dedicated clip-on transmitter for E-TTL/E-TTL II wireless flash system.

  • E-TTL Compatible
  • Built-in AF-Assist Beam
  • Sets and Controls Flash Rations
  • High-Speed FP Flash
  • E-TTL Wireless  ... More
    Is This Item Right For Me? - Ask Our Experts
    Phone 800.868.2462
  •  

    Product Description

    Dedicated clip-on transmitter for E-TTL/E-TTL II wireless flash system.

    Product Features
    • E-TTL Compatible
    • Built-in AF-Assist Beam
    • Sets and Controls Flash Rations
    • High-Speed FP Flash
    • E-TTL Wireless Autoflash Control

    Specifications

    Flash
    Type 550EX-dedicated, clip-on Speedlite transmitter with direct contacts
    Compatible Cameras Type A EOS cameras (E- TTL, autoflash); Type B EOS cameras (Manual flash)
    Sync Speed High-Speed Sync (FP flash): Enabled with high-speed sync mode
    Flash Exposure Confirmation 1. Before flash fires during FE lock Adequate flash exposure indicated by the flash exposure level icon lit in the viewfinder. Insufficient flash exposure indicated by the flash exposure level icon blinking in the viewfinder. 2. After flash fires ST-E2's flash confirmation lamp lights in green for 3 sec.
    AF Assist Beam Compatible with EOS-3's 45-point Area AF and 28mm and longer lens focal lengths Effective Range: Approx. 0.6 to 10m/2.0 to 16.5 ft along the periphery (in total darkness).
    Wireless Functions
    Transmission System Infrared pulse
    Transmission Range Indoors: Approx. 12-15 m/39.4 - 49.2 ft; Outdoors: Approx. 8-10 m/ 26.2-32.8 ft
    Flash Ratio Control For A:B ratio: 1:8 to 8:1, in half- step increments or 13 steps
    Flash Coverage Transmission Coverage: +/-40 degrees horizontal and +/-30 degrees vertical
    Slave Operation Confirmation With test transmission button. Slave A fires followed by slave B at 1/64 output.
    Slave Unit SE Mode Cancellation Cancels when the test transmission button or FE lock botton is pressed to turn on the slave unit.
    General
    Power Source 2CR2 lithium (6V) battery x 1 Battery Life: Approx. 1,500 transmissions (At room temperature and with a new set of batteries)
    SE Mode While the power switch is set to I or HOLD, the transmission turns off automatically after about 90 sec. of non-use.
    Dimensions 62 (W) x 51 (H) x 80 (D)mm/2.4 (W) x 3.1 (D) in
    Weight 100g/3.5 oz (exluding battery)

    Customers Who Bought This Item Also Viewed

    Camcor.com

    Contents of all material on these pages are ©2023 Camcor, Inc. All Rights Reserved.