Login
Call Camcor 800 868 2462 Email Camcor
Shopping Cart
Home ›  Audio ›  Microphones Wired ›  Crown

CROWN PZM185 Microphone XLR Cable Polar Pattern

Print CROWN PZM185 Microphone XLR Cable Polar Pattern pageRequest Bulk Pricing CAMCOR ITEM NO. 268009954 | MFG. PART NO. PZM185
CROWN PZM185 Microphone XLR Cable Polar Pattern
Zoom
Close WindowZoom
Alternate View

MSRP: $299.00
Savings: $70.00

Your Price: $229.00
Quantity

Product Highlights
CROWN PZM185 Microphone XLR Cable Polar Pattern Budget model ideal for applications such as conferences, group discussions, interviews, broadcast, home video production, lectures, and recordings. ... More

Is This Item Right For Me? - Ask Our Experts
Phone 800.868.2462
 

Product Description

CROWN PZM185 Microphone XLR Cable Polar Pattern

Budget model ideal for applications such as conferences, group discussions, interviews, broadcast, home video production, lectures, and recordings. XLR connector on 8-foot mini cable, battery or phantom powered.

(cc)

Product Features
  • Conferences, group discussions, seated interviews - Lay the microphone on the table. Use one microphone in the middle of every 4 to 6 people. Ideally, no person should be more than 3 feet (0.9144 m) from the nearest microphone. For maximum clarity, hold the conference in an acoustically "dead" room with carpeting, acoustic-tile ceiling, and drapes.
  • Lectures - Place the microphone on top of the lectern, near the edge of the lectern farthest
    from the person speaking.
  • Video or movies - Lay the microphone on a table or on the fl oor near the action.
  • Music - Place the microphone near the sound source, on the fl oor, on a wall, or on a large
    hard-surfaced panel. For grand piano, tape the microphone to the center of the underside of
    the raised lid.
    For spaced-pair stereo recording, place two microphones three to ten feet (.914 to 3.05m) apart on a wall or on the fl oor about fi ve to twenty feet (1.52 to 6.10m) from the musical ensemble. For near-coincident stereo recording, mount them on a microphone stand using a stereo bar or stereo microphone adapter.

Specifications

Specifications
Element Electret condenser.
Frequency response (typical) 50 Hz to 16 kHz (Fig. 1).
Polar pattern Hemispherical (half-omni) on a large surface.
Impedance 150 ohms, balanced. Recommended minimum load impedance 1000 ohms.
Open circuit sensitivity (1.5V battery power) 0.8mV/Pa (-62 dB re 1 volt/Pa*).
Power sensitivity (1.5V battery power) -59.5 dBm. EIA sensitivity -154 dBm.
Open-circuit sensitivity (phantom power) 3.2 mV/Pa* (-50 dB re 1V/Pa).
Power sensitivity (phantom power) -47.5 dBm.EIA sensitivity -142 dBm.
Equivalent noise level (self-noise) 21 dB SPLtypical, A-weighted (0 dB = .0002 dyne/cm2).
S/N ratio 73 dB at 94 dB SPL.
Maximum SPL 120 dB SPL produces 3% distortion with phantom power.
Polarity Positive pressure on the diaphragm produces positive voltage on pin 2 with respect to pin 3 of the output connector.
Cable 8-foot (2.438-m), 2-conductor shielded, permanently attached cable. No other cable supplied; use 2-conductor shielded mic cable.
Output connector 3-pin XLR-type pro audio connector.
Operating voltage One 1.5V size AAA alkaline battery (Duracell MN2400 or equivalent) or 12 to 48V phantom power (positive voltage on pins 2 and 3 with respect to pin 1).
Battery life Approximately 45 days.
Current drain 0.5 mA.
Materials High-impact plastic housing and steel power module.
Finish Satin black.
Weight 4 ounces (115 grams).
Included accessories 1.5V AAA battery.

Customers Who Bought This Item Also Viewed

Alamance County Chamber Certified Digital Photo Processing Qualified Digital Processing Center Photo Marketing Association

Camcor.com

Contents of all material on these pages are ©1999-2016 Camcor, Inc. All Rights Reserved.