Da-Lite Cosmopolitan Electrol 100" Diagonal Video Spectra 1.5 Surface
CAMCOR ITEM NO. DAL73650 | MFG. PART NO. 73650
Especially designed for demanding video and overhead LCD projection applications where a balance of higher gain and greater viewing angle is required. The special pearlescent surface may be cleaned ... More
Especially designed for demanding video and overhead LCD projection applications where a balance of higher gain and greater viewing angle is required. The special pearlescent surface may be cleaned with mild soap and water. Screen surface can be cleaned with mild soap and water. Flame retardant and mildew resistant.
Ideal for applications where a recessed installation is not desired or feasible.
Patented in-the-roller motor mounting system for quiet operation.
Handsome white enamel case blends with any decor.
Matte White fabric up to 10' high will be seamless.
Glass Beaded fabric up to 8' will be seamless.
Video Spectra 1.5 and High Contrast Matte White fabric available in sizes up to 8' high.
High Power fabric is available in sizes up to 9'x12' and will be seamless in sizes up to 6' high.
Optional floating mounting bracket allows screen to be mounted onto a wall or ceiling studs and aligned left or right after installation by releasing two sets of screws.
electrically operated 120 volt (60 Hz) 1.4 amp.
Shall have specially designed motor mounted inside the roller with a patented noise silencer to be three wire quick reversal type, oiled for life, with automatic thermal overload cut-out, integral gears, capacitor and an electric brake to prevent coasting.
To have pre-set but adjustable limit switches to automatically stop picture surface in the "up" and "down" positions.
The roller to be of rigid metal, 3" in diameter.
Screen fabric to be flame retardant and mildew resistant fiberglass with Glass Beaded, Matte White, High Contrast Matte White, Video Spectra® 1.5 or High Power picture surface with black masking borders standard.
Bottom of fabric shall be formed into a pocket holding a 3/8" diameter metal rod.
Case to be 22-gauge steel, hexagon in shape with flat back to prevent scraping fabric.
Case end caps to be heavy duty, allowing no exposed roller pins.
End caps shall form sturdy brackets for wall or ceiling installation.
To be complete with three position control switch with cover plate.
Screen to be listed by Underwriters' Laboratories and CSA. Matte White: Horizontal seams required when both dimensions exceed 10 feet.
Glass Beaded: Horizontal seams required when both dimensions exceed 8 feet.
Video Spectra 1.5 and High Contrast Matte White: Available in sizes where both dimensions do not exceed 8 feet.
High Power: Available in sizes up to and including 9 feet by 12 feet.
Horizontal seams required when both dimensions exceed 6 feet.
DETAIL DIMENSIONAL DRAWINGS, WIRING DIAGRAMS AND INSTALLATION INSTRUCTIONS AVAILABLE UPON REQUEST.