CAMCOR ITEM NO. EXT6049703 | MFG. PART NO. 60-497-03
MSRP: 649.00
Savings: $649.00
Your Price: $CALL
LIMITED STOCK - order today!
CLOSE OUT SPECIAL - Only 1 left in stock!!
Product Highlights
Three Input S-Video with Four Input Stereo Audio MediaLink Switcher.The Extron MLS 103 SV MediaLink Switcher is a compact, three input, one output active switcher. It comes with four audio inputs on ... More
Is This Item Right For Me? - Ask Our Experts
California Residents:
WARNING: Cancer and reproductive harm - See www.P65Warnings.ca.gov for more information.
Three Input S-Video with Four Input Stereo Audio MediaLink Switcher.
The Extron MLS 103 SV MediaLink Switcher is a compact, three input, one output active switcher. It comes with four audio inputs on captive screw connectors and includes preamp volume control.
Inputs one through four provide unbalanced audio while an additional input is an active auxiliary line level mono audio input that can be mixed with any of the other four selectable inputs.
When used with a MediaLink Controller, input switching and volume are easily achieved via the controller's user interface. The MLS 103 SV, with three inputs and one output on 4-pin mini DIN connectors, can be controlled via the front panel input buttons or RS-232.
Part of the Extron VersaTools line of products, the MLS 103 SV is housed in a quarter rack width metal enclosure, making it ideal for installation in podiums and other small space areas.
Because of its small size, the switcher can also be mounted or placed on a shelf along with a VCR and DVD player.
MediaLink Switchers are designed to be used in conjunction with a MediaLink Controller to facilitate low-cost integration. They can also be used as stand-alone switchers.
Product Features
Inputs: Three female 4-pin mini DIN connectors for S-video; captive screw connectors for audio
Output: One female 4-pin mini DIN connector for S-video; one captive screw connector for audio
250 MHz (-3 dB) video bandwidth - Maintains signal integrity.
Additional input accepts mono line level audio signals for mixing with any of the four switchable inputs
Audio input gain and attenuation
Remote volume control via RS-232 or MediaLink Controller
Input selection control via MediaLink Controller, front panel, or RS-232
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu +4 dBu and 0 dBu are professional audio line level standards. -10 dBV and -20 dBV are semiprofessional, computer audio, and consumer audio standards.
Maximum level
+14 dBu, (balanced or unbalanced) at stated %THD+N
Input gain adjustment
18 dB to +24 dB, adjustable per input (via RS-232/control software)
Aux/Mix level adjustment
43 dB to +24 dB (adjustable only via front panel)
Audio output
Number/signal type
1 stereo or mono, balanced/unbalanced
Connectors
(1) 3.5 mm captive screw connector, 5 pole
Impedance
50 ohms unbalanced, 100 ohms balanced
Gain error
±0.1 dB channel to channel
Maximum level (Hi-Z)
>+21 dBu, balanced or unbalanced at 1% THD+N
Maximum level (600 ohm)
>+15 dBm, balanced or unbalanced at 1% THD+N
Note
An unbalanced-wired output will result in a 6 dB attenuation. A balanced-wired output will have unity (0 dB) gain/attenuation.
Control/remote - switcher
Serial control port
RS-232, 3.5 mm, 5 pole captive screw connector
Baud rate and protocol
9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations
A = TX, B = RX, D = GND
Program control
Extron's control/configuration program for Windows® Extron's Simple Instruction Set (SIS™)
General
Power
Supplied by an optional MediaLink Controller (MLC) or an external power supply
External power supply (included)
100 VAC to 240 VAC, 50/60 Hz, external, autoswitchable; to 12 VDC, 1 A max., regulated
Power input requirements
12 VDC, 0.4 A
Temperature/humidity
Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, noncondensing Operating +32° to +122°F (0° to +50°C) / 10% to 90%, noncondensing
Rack mount
Yes, with optional VersaTools® rack shelf, part #60-190-20; or standard 1U rack shelf, #60-190-01 Furniture mountable with optional mini under-desk brackets, part #70-212-01 Projector mountable with optional bracket, part #70-217-01
Enclosure type
Metal
Enclosure dimensions
1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide) 4.2 cm H x 11.0 cm W x 7.6 cm D (Depth excludes connectors and buttons.)
Product weight
0.7 lbs (0.3 kg)
Shipping weight
3 lbs (2 kg)
Vibration
ISTA 1A in carton (International Safe Transit Association)
Login to My Camcor Account 
CAMCOR ITEM NO. EXT6049703 | MFG. PART NO. 60-497-03
California Residents:
