Login
Call Camcor 800 868 2462Email Camcor
  • For Schools  Education
  • For Government  Government
  • Resource Center  Brands
  • Brands  Brands
  • Login  Login
Shopping Cart
Home ›  Audio ›  Audio/Visual Products ›  Svsi

SVSi N2141 Stand-alone JPEG2000 Encoder *Requires Optional N9312 Pwr Supply*

Print SVSi N2141 Stand-alone JPEG2000 Encoder *Requires Optional N9312 Pwr Supply* pageRequest Bulk Pricing CAMCOR ITEM NO. 287100003 | MFG. PART NO. N2141
SVSi N2141 Stand-alone JPEG2000 Encoder *Requires Optional N9312 Pwr Supply*
Zoom
Close WindowZoom
Alternate View
Your Price: $1759.00
Quantity

Product Highlights
SVSi’s N2141/N2241 AV over IP Series provides a flexible, feature-rich, and simple-to-deploy Digital Media Distribution and Switching solution satisfying the most demanding applications. The ... More

Is This Item Right For Me? - Ask Our Experts
Phone 800.868.2462
 

Product Description

SVSi’s N2141/N2241 AV over IP Series provides a flexible, feature-rich, and simple-to-deploy Digital Media Distribution and Switching solution satisfying the most demanding applications. The N2141/N2241 provides low latency for 1080p/60hz encoding and decoding. SVSi video over IP encoders are used to encode and distribute sources of almost any format onto an existing IP network making that stream available to any endpoint in the facility. Video over IP Decoders are used to decode SVSi’s Networked AV streams back to DVi or HDMI format for display on any monitor. With the ability to direct any source stream to any display, large, low-cost switching and distribution systems are simple to deploy without proprietary cabling or dedicated switching hardware.

  • 1080p/60hz encoding and decoding.
  • Input and Output Scaling – scaling performed in encoders or decoders for maximum flexibility with V-Series sources and displays.
  • Power Over Ethernet (POE) – eliminates requirement for local power supply and speeds installation. Units can still be powered locally from 12VDC allowing for easy rack-mountable, high-density installations.
  • Infrared (IR) emitter connection allows control of low-cost, IR-only display devices.
  • Fast install with Phoenix connectors for Power, IR, RS232 serial, and analog audio interfaces.
  • Pass-through DVI interface allows easy installation with local display such as desktop PC applications.

Specifications

N2141 Low-Latency AV over IP Encoder Specs

Video

Signal Types Input HDMI, DVI, Dual-Mode DisplayPort (DP++), RGB/VGA, Component

Output Network video over Ethernet via RJ45
Formats
DVI, HDMI (through adapter), HDCP content protection support, RGBHV, YPbPr
Input Resolutions HDMI and DVI (Progressive) 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), plus any other resolution allowed by HDMI up to 150MHz pixel clock

HDMI and DVI (Interlaced) 1920x1080@50Hz (1080i50), 1920x1080@60Hz (1080i60)

VGA 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 1024x768@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60)

Component 480p, 576p, 720p50, 720p60, 1080p24, 1080p30, 1080i50, 1080p50, 1080i60,1080p60
Output Resolutions
Matched to inputs or scaled to 720x480@59.94Hz (480p59.94), 1280x720@50Hz (720p50), 1280x720@59.94Hz (720p59.94), 1280x720@60Hz (720p60), 1280x800@60Hz, 1920x1080@50Hz (1080p50), 1920x1080@59.94Hz (1080p59.94), 1920x1080@60Hz (1080p60)
Note: Input resolutions supported @60Hz refresh rates are also supported @59.94Hz.
Analog-To-Digital Conversion
8-bit 150 MHz per each of three color channels
Note: The N2141 does not accept Composite or S-Video (YC).
Audio

Signal Types Input Embedded audio on DVI-D or HDMI (through adapter), or Analog Stereo (Balanced or Unbalanced)

Output Ethernet, Embedded in DVI-D (HDMI through adapter)
Formats HDMI 8ch PCM

Analog Stereo 2-channel
Analog-To-Digital Conversion
16-bit 32 kHz, 44.1 kHz and 48 kHz
Latency

720p
25 ms
1080p
25 ms
Note: Scaling can add up to 16 ms of latency.
Note: To calculate an end-to-end latency value, add the given Encoder latency (shown above) to your Decoder’s latency (which is provided in the Decoder’s Specifications sheet).
Communications

Ethernet
10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
HDMI
HDCP, EDID management
Ports

+12V 2A
One 12 Volt DC power input.
P0 POE
8-wire RJ45 female.
10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port.
Provides both the network connection and the power to the Encoders and Decoders.
P1
8-wire RJ45 female.
10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port.
IR
2-pin terminal Phoenix connector. Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter may be necessary (not included).
RS232
3-pin terminal Phoenix connector which provides a serial control interface. Full duplex communication. Available terminal speed settings: 9600-115200 baud rate.
AUDIO
5-pin terminal Phoenix connector which provides user-selectable balanced/unbalanced input. Dedicated audio input.
DVI-D OUTPUT
DVI-D female; HDMI/DVI digital video/audio output. Allows for video and embedded digital audio output.
DVI-I INPUT
DVI-I female; HDMI/DVI digital video/audio input. Allows for the use of analog or digital video sources (as well as embedded audio).
Note: DVI-D output is the digitally converted analog signal from the DVI-I input. Appropriate adapter or interface cable required for DVI to accommodate HDMI. With the right adapter, the DVI-I Input port accepts component signals.
LEDs and Buttons

FRONT PANEL

RESET button
Recessed pushbutton. Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings.
ID button
Recessed pushbutton. Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command).
POWER LED
On solid (green) when operating power is supplied (via local power supply). This activity is also shown by the PWR LED on the rear panel.
STATUS LED
On flashing (green) when there is software activity. This activity is also shown by the STAT LED on the rear panel.
REAR PANEL

PWR LED
Same as POWER LED described above.
DVI LED
On (green) when a DVI outputconnection exists.
STAT LED
Same as STATUS LED described above.
STRM LED
On (green) when the unit is streaming video.
Power Requirements

Power Supply
2.0 Amp @ 12 Volts DC; 100-240 Volts AC power supply; SVSi part number N9312.
Power over Ethernet (PoE)
Can be powered via a PoE switch or other equipment with a PoE source. Conforms to IEEE 802.3af Class 3 (802.3at Type 1).
Note: In order for the unit to receive Power over Ethernet (PoE), it must be connected to a switch or other equipment that has a PoE PSE (Power Sourcing Equipment) port. Warning: Do not run wiring that is connected to a PoE PSE port outside of the building where the PSE resides. It is for intra-building use only. PoE does not pass through the daisy chain (P1) port.
Physical

Mounting Options
Stand alone, surface mount, wall mount, or rack mount.*
Environmental Temperature 32° to 104°F (0° to 40°C)

Humidity 10% to 90% RH (non-condensing)

Heat Dissipation Up to ~44 BTU/Hr
Dimensions Height 1.05 inches (2.67 cm)

Width 7.888 inches (20.04 cm)

Depth 5.5 inches (13.8 cm)
Weight
1.6 lbs (0.73 kg)
Compliance
FCC, CE, and NTRL
*Mounting wings (SVSi part number N9101) required for surface and wall mounting. Rack shelf (SVSi part number N9102) or card cage (SVSi part number N9206) required for rack mounting. Shelf accommodates two side-by-side N-Series encoders and decoders. Card cage accommodates up to six N-Series encoder and decoder cards (mix and match any series). Mounting accessories sold separately and are compatible with most N-Series devices. Contact SVSi sales representative or visit website for details.

Customers Who Bought This Item Also Viewed

Alamance County Chamber Certified Digital Photo Processing Qualified Digital Processing Center Photo Marketing Association

Camcor.com

Contents of all material on these pages are ©1999-2016 Camcor, Inc. All Rights Reserved.