Login
Call Camcor 800 868 2462 Email Camcor
Shopping Cart
Home ›  Audio ›  Audio/Visual Products ›  Svsi

SVSi N2241 Stand-alone JPEG2000 Decoder *Requires Optnl N9312 Pwr Sply or PoE*

Print SVSi N2241 Stand-alone JPEG2000 Decoder *Requires Optnl N9312 Pwr Sply or PoE* pageRequest Bulk Pricing CAMCOR ITEM NO. 287100004 | MFG. PART NO. N2241
SVSi N2241 Stand-alone JPEG2000 Decoder *Requires Optnl N9312 Pwr Sply or PoE*
Zoom
Close WindowZoom
Alternate View
Your Price: $1179.00
Quantity

Product Highlights
SVSi’s N2141/N2241 AV over IP Series provides a flexible, feature-rich, and simple-to-deploy Digital Media Distribution and Switching solution satisfying the most demanding applications. The ... More

Is This Item Right For Me? - Ask Our Experts
Phone 800.868.2462
 

Product Description

SVSi’s N2141/N2241 AV over IP Series provides a flexible, feature-rich, and simple-to-deploy Digital Media Distribution and Switching solution satisfying the most demanding applications. The N2141/N2241 provides low latency for 1080p/60hz encoding and decoding. SVSi video over IP encoders are used to encode and distribute sources of almost any format onto an existing IP network making that stream available to any endpoint in the facility. Video over IP Decoders are used to decode SVSi’s Networked AV streams back to DVi or HDMI format for display on any monitor. With the ability to direct any source stream to any display, large, low-cost switching and distribution systems are simple to deploy without proprietary cabling or dedicated switching hardware.

  • 1080p/60hz encoding and decoding.
  • Input and Output Scaling – scaling performed in encoders or decoders for maximum flexibility with V-Series sources and displays.
  • Power Over Ethernet (POE) – eliminates requirement for local power supply and speeds installation. Units can still be powered locally from 12VDC allowing for easy rack-mountable, high-density installations.
  • Infrared (IR) emitter connection allows control of low-cost, IR-only display devices.
  • Fast install with Phoenix connectors for Power, IR, RS232 serial, and analog audio interfaces.
  • Pass-through DVI interface allows easy installation with local display such as desktop PC applications.

Specifications

N2241 Low-Latency AV over IP Decoder Specs

Video

Signal Types Input Network video over Ethernet via RJ45

Output HDMI, DVI-D
Formats
DVI, HDMI (through adapter), HDCP content protection support
Input Resolutions HDMI and DVI (Progressive) Matched to inputs or scaled to 720x480@59.94Hz (480p59.94), 1280x720@50Hz (720p50), 1280x720@59.94Hz (720p59.94), 1280x720@60Hz (720p60), 1280x800@60Hz, 1920x1080@50Hz
(1080p50), 1920x1080@59.94Hz (1080p59.94), 1920x1080@60Hz (1080p60)
Audio

Signal Types Input Network video over Ethernet via RJ45

Output Embedded audio on DVI-D or HDMI (through adapter)
Formats HDMI 8ch PCM

Analog Stereo 2-channel
Digital-To-Analog Conversion
16-bit 32 kHz, 44.1 kHz and 48 kHz
Latency

720p
25 ms
1080p
25 ms
Note: Scaling can add up to 16 ms of latency.
Note: To calculate an end-to-end latency value, add the given Decoder latency (shown above) to your Encoder’s latency (which is provided in the Encoder’s Specifications sheet).
Communications

Ethernet
10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
HDMI
HDCP, EDID management
Ports

+12V 2A
One 12 Volt DC power input.
P0 POE
8-wire RJ45 female.
10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port.
Provides both the network connection and the power to the Encoders and Decoders. See the section Power Requirements on page 3 for more information.
P1
8-wire RJ45 female.
10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port.
IR
2-pin terminal Phoenix connector. Provides Infrared (IR) output only (33-60 kHz).
Emitter may be necessary (not included).
RS232
3-pin terminal Phoenix connector which provides a serial control interface. Full duplex communication. Available terminal speed settings: 9600-115200 baud rate.
AUDIO
5-pin terminal Phoenix connector which provides user-selectable balanced/unbalanced input. Dedicated audio output.
DVI-D OUTPUT
DVI-D female; HDMI/DVI digital video/audio output. Allows for video and embedded digital audio output.
LEDs and Buttons

FRONT PANEL

RESET button
Recessed pushbutton. Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings.
ID button
Recessed pushbutton. Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command).
POWER LED
On solid (green) when operating power is supplied (via local power supply). This activity is also shown by the PWR LED on the rear panel.
STATUS LED
On flashing (green) when there is software activity. This activity is also shown by the STAT LED on the rear panel.
REAR PANEL

PWR LED
Same as POWER LED described above.
DVI LED
On (green) when a DVI outputconnection exists.
STAT LED
Same as STATUS LED described above.
STRM LED
On (green) when the unit is streaming video.
Power Requirements

Power Supply
2.0 Amp @ 12 Volts DC; 100-240 Volts AC power supply; SVSi part number N9312.
Physical

Mounting Options
Stand alone, surface mount, or wall mount. Mounting wings (sold separately — SVSi part number N9101) are required for mounting.
Environmental Temperature 32° to 104°F (0° to 40°C)

Humidity 10% to 90% RH (non-condensing)

Heat Dissipation Up to ~44 BTU/Hr
Dimensions Height 1.05 inches (2.67 cm)

Width 7.888 inches (20.04 cm)

Depth 5 inches (12.7 cm)
Weight
1.5 lbs (0.68 kg)
Compliance
FCC, CE, and NTRL
*Mounting wings (SVSi part number N9101) required for surface and wall mounting. Rack shelf (SVSi part number N9102) or card cage (SVSi part number N9206) required for rack mounting. Shelf accommodates two side-by-side N-Series encoders and decoders. Card cage accommodates up to six N-Series encoder and decoder cards (mix and match any series). Mounting accessories sold separately and are compatible with most N-Series devices. Contact SVSi sales representative or visit website for details.

Customers Who Bought This Item Also Viewed

Alamance County Chamber Certified Digital Photo Processing Qualified Digital Processing Center Photo Marketing Association

Camcor.com

Contents of all material on these pages are ©1999-2016 Camcor, Inc. All Rights Reserved.