Shure MX690-G5 Wireless Boundary Microphone with Wireless Transmitter
CAMCOR ITEM NO. 136017586 | MFG. PART NO. MX690-G5
Shure MX690 offers total freedom of placement with no holes to drill or cables to run for installation.The Wireless Boundary Microphone is the perfect solution for conference and meeting spaces where ... More
Is This Item Right For Me? - Ask Our Experts
WARNING: Cancer and reproductive harm - See www.P65Warnings.ca.gov for more information.
Shure MX690 offers total freedom of placement with no holes to drill or cables to run for installation.
The Wireless Boundary Microphone is the perfect solution for conference and meeting spaces where users demand flexibility and high performance. Compatible with Shure SLX® Wireless Systems.
Sleek, low profile design Frequency agile, microprocessor controlled transmitter Bi-color status indicator IR link to SLX receiver for automatic frequency synchronization Programmable mute function Battery level indicator Operates on two AA batteries Logic output for remote LED and mute control CommShield Technology for improved RF filtering
Operating Range 30 m (100 ft.) Note: Actual range depends on RF signal absorption, reflection, and interference Frequency Stability ±10 ppm Maximum Frequency Deviation 45 kHz Oscillator Type Phase-locked loop (PLL) controlled synthesizer Power Requirements 3V (2 AA alkaline or rechargeable batteries) Battery Life ≥8 hours (alkaline) Power Consumption 130 mA, ±15 mA Operating Temperature Range -1857 °C (0135 °F) Note: Battery may limit this range Dimensions 43 mmH x 87 mmW x 148 mmD (1 11/16 x 3 3/8 x 5 13/16 in.) Weight Net: 11.2 oz Packaged: 18.2 oz Microphone Specs
Type Condenser (electret bias) Frequency Response 5017000 Hz Polar Pattern (at 1 kHz) Cardioid Sensitivity (at 1 kHz , open circuit voltage) 33 dBV/Pa (22 mV) 1 Pascal=94 dB SPL Dynamic Range (1 kΩ load at 1 kHz) 96 dB Common Mode Rejection (10 Hz to 100 kHz) 45 dB minimum Preamplifier Output Clipping Level (1% THD) 6 dBV (0.5 V) Polarity Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector or tip of 1/4 phone plug. Customers Who Bought This Item Also Viewed