Shure SM87A Vocal Microphone 50 to 18,000 Hz SM87A
CAMCOR ITEM NO. 136017066 | MFG. PART NO. SM87A
The Shure SM87 now features a new design and has been renamed the SM87A. In response to user requests, Shure has redesigned this microphone by just slightly thickening the handle for a more ... More
Is This Item Right For Me? - Ask Our Experts
WARNING: Cancer and reproductive harm - See www.P65Warnings.ca.gov for more information.
The Shure SM87 now features a new design and has been renamed the SM87A. In response to user requests, Shure has redesigned this microphone by just slightly thickening the handle for a more comfortable feel. In addition, the SM87A now includes the A25D break-resistant swivel adapter.
A favorite choice of the world's top entertainers, the SM87A condenser microphone features a smooth frequency response that's specifically tailored for warm, rich, vocal reproduction.
Tight polar pattern for high gain-before-feedback and rejection of unwanted sounds
Effective three-point shock mount minimizes stand and handling noise
Rated at 150 ohms (100 ohms actual ±20%) Recommended minimum load impedance: 800 ohms
Sensitivity (at 1,000 Hz) Open Circuit Voltage
52.5 dBV/Pa (2.4 mV) (1 Pa = 94 dB SPL)
Clipping Level (at 1,000 Hz) 1000 ohm Load
6 dBV (0.5 V).
Maximum SPL (at 1,000 Hz)
140.5 dB (0.25% THD, 1000 ohm load)
Self-Noise (equivalent sound pressure level measured with true rms voltmeter)
24 dB typical, A-weighted 26 dB typical, weighted per DIN 45 405
116.5 dB (maximum SPL to A-weighted noise level)
70 dB at 94 dB SPL (IEC 651) [S/N ratio is difference between 94 dB SPL and equivalent SPL of self- noise A-weighted.]
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Phantom Supply Requirement
11 to 52 Vdc, positive at both pins 2 and 3
1.0 to 1.2 mA
Three-pin (XLR) professional audio
Aluminum construction with steel grille and satin black finish
200 grams (7 oz)
Eligible to bear CE Marking. Conforms to European EMC Directive 89/336/EEC. Meets applicable tests and perfor- mance criteria in European Standard EN55103 (1996) parts 1 and 2, for residential (E1) and light industrial (E2) environments.