CAMCOR ITEM NO. TOA906MK2 | MFG. PART NO. A-906MK2 UL
THE TOA 900 SERIES are widely recognized as the industry standard in installed sound system amplification. When reliability and performance are critical such as in paging and music distribution for ... More
Is This Item Right For Me? - Ask Our Experts
WARNING: Cancer and reproductive harm - See www.P65Warnings.ca.gov for more information.
THE TOA 900 SERIES are widely recognized as the industry standard in installed sound system amplification. When reliability and performance are critical such as in paging and music distribution for airport, hospital, and industrial sound systems you can count on the TOA 900 Series to perform consistently, day-in and day-out.
The A-903MK2 (30 W), A-906MK2 (60 W) and A-912MK2 (120 W) Modular Mixer/Amplifiers are engineered for high performance with wide frequency response, very low noise and distortion, and excellent output regulation. Eight module slots allow you to easily configure custom configurations using TOA plug-in modules with an extensive array of features and connector types. You can increase the input capacity by connecting a second mixer or mixer/amplifier to the rear-panel Bridge In/Out jack. Outputs include transformerisolated 25 V, 70 V and 8 ohm (A-903MK2: 4 ohm) plus a direct low-impedance mode if non-transformer operation is required.
Multiple paging priorities are easily configured using optional mutetype modules activated by external switch-closure or mute-send modules. Pre-Out/Power-In jacks allow connection of external signal processing between the mixer and amplifier sections. Other features include protection circuitry, auxiliary output, bass/treble controls and remote master volume terminals.
Modular design allows fast and easy custom configurations.
Engineered for high performance with wide frequency response, very low noise and distortion, and excellent output regulation.
Eight Module Slots accept any combination of TOA plug-in modules for unmatched flexibility.
30, 60 or 120 Watts RMS Output Power.
Dual Mute Bus permits multiple levels of paging priority using optional mute-type modules.
Remote Master Volume controlled with an external 10k ohm linear-taper potentiometer.
25 V, 70 V and 4/8 Ohm Speaker Outputs with screw terminal connector and protective cover plate.
Protection Circuitry prevents potential damage from overload, short-circuit, DC offset or overheating.
Front Panel Features: - Individual Channel and Master Volume Controls. - Bass/Treble Tone Controls with Tone Defeat Switch. - Low Cut Switch to limit low frequency response. - Normal, Peak, Power, Protect, and Signal LEDs provide instantly recognizable status indication.
Rear Panel Features: - Auxiliary Output for connecting an external mixer or recording device. -Pre-amp. Out / Power Amp. In Insert Jacks for connecting external signal processors. -Bridging Input/Output Jack for fast and easy system expansion.
Volume Control Security Covers included (4), model YA-920 .