Tripp Lite SmartPro 1000RM2U UPS

Print Tripp Lite SmartPro 1000RM2U UPS pageRequest Bulk Pricing CAMCOR ITEM NO. 323900137 | MFG. PART NO. SMART1000RM2U
Tripp Lite SmartPro 1000RM2U UPS
Tripp Lite SmartPro 1000RM2U UPS
Zoom
Close WindowZoom
Alternate View

MSRP: $820.80
Savings: $320.42

Your Price: $500.38
Quantity

Usually ships in 1-3 business days

Product Highlights
Tripp Lite's SMART 1000RM2U intelligent, line-interactive sine wave rack/tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage ... More

Is This Item Right For Me? - Ask Our Experts
Phone 800.868.2462
 
WarningCalifornia Residents:
WARNING: Cancer and reproductive harm - See www.P65Warnings.ca.gov for more information.

Product Description

Tripp Lite's SMART 1000RM2U intelligent, line-interactive sine wave rack/tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requires only two rack spaces (2U) in a standard rack enclosure. Large internal batteries offer 17 minutes half load runtime and 7 minutes at full load. Maintains regulated 120V nominal output without using battery power during brownouts and overvoltages from 83 to 147V. 1000VA/700 watt power handling capability and full time sine wave output supports networking, telecom and other sensitive electronic applications. Includes a total of 6 outlets arranged in 2 load banks that are individually controllable via software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. Supports simultaneous remote monitoring of UPS and site power conditions via built-in network accessory card slot, USB and DB9 serial monitoring ports. Optional SNMPWEBCARD accessory enables remote monitoring of UPS as a managed device via network management console applications. Communications ports support messaging of detailed UPS operating parameters and line power status. Includes PowerAlert UPS monitoring and unattended shutdown software with management support for an unlimited number

 

Specifications

General Information
ManufacturerTripp Lite
Brand NameTripp Lite
Product LineSmartPro
Product TypeLine-interactive UPS
Technical Information
Plug/Connector TypeNEMA 5-15P
Receptacles6 x NEMA 5-15R
Power Description
Load Capacity1000 VA/700 W
Input Voltage110 V AC
Input Voltage Range120 V AC Single-phase
Output Voltage120 V AC Single-phase
Frequency60 Hz
Waveform TypeSine Wave
FilteringEMI / RFI
Management
Network ManagementSNMP Manageable Optional
Overload Protection15A input breaker
Alarm
  • On Battery
  • Overload
  • Low Battery
  • Emergency Power OFFYes
    Controls/Indicators
    Status Indicators5 front panel LEDs - Green POWER LED, 3 color BATTERY CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED.
    Interfaces/Ports
    Interfaces/Ports
  • 1 x DB-9
  • 1 x USB
  • Modular Slots1 x Communications Slot
    Battery Information
    BatteriesSealed Lead Acid User-replaceable Hot-swappable
    Backup/Run Time
  • 0.15 Hour 707.11 W Full Load
  • 0.35 Hour 353.55 W Half Load
  • Battery Life26297.44 Hour to 52594.88 Hour
    Battery Recharge Time4 Hour Minimum
    Environmental Conditions
    Temperature32F (0C) to 104F (40C) Operating
    Humidity0 to 95% Non-condensing Relative Humidity
    Physical Characteristics
    Form Factor2U Rack-mountable
    Power Cord/Cable10 ft
    Dimensions3.50" Height x 17.50" Width x 13.50" Depth
    Weight35 lb
    Miscellaneous
    Package Contents
  • SmartPro 1000RM2U UPS
  • SMART 1000RM2U UPS System
  • Mounting hardware for 4 post rackmount installation
  • Cabling for USB & DB9 monitoring and EPO switching
  • PowerAlert unattended shutdown and UPS/Power monitoring software
  • Warranty information
  • Additional Information
  • SMART1000RM2U line interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network grade AC surge suppression
  • 1000VA / 700 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices
  • Supports 2U rackmount installation in 4 post rack enclosures with included mounting accessories, 2 post rackmount mountable with optional 2POSTRMKIT accessory, upright tower installation supported with optional 2-9USTAND accessory
  • Large internal batteries offer runtimes of 21 minutes at half load (500VA / 350 watts) and 9 minutes at full load (1000VA / 700 watts)
  • Maintains regulated 120V nominal output during brownouts and overvoltages from 83 to 147V
  • Includes 6 UPS-supported outlets arranged in 2 individually controllable load banks (2 outlets per bank) that can be powered off and back on again via software interface
  • PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands
  • Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise management software is also available for select opportunies
  • Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
  • Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected devices
  • Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)
  • Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
  • Emergency Power Off (EPO) interface with cable
  • Multi-function audible alarms and set of 5 front panel LEDs
  • Network-grade AC surge suppression
  • Attractive all-black color scheme
  • UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary
  • Two year warranty with $250,000 connected equipment insurance (USA & Canada only)
  • System RequirementsTYPICAL APPLICATIONS: Ideal for rackmount or upright tower protection of fileservers, network accessories and telecommunications equipment in server rooms, internetworking closets, co-location racks, kiosks and a variety of other locations. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems.
    Certifications & StandardsUL1778 (USA), cUL (Canada), FCC Class B (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications
    Warranty
    Standard Warranty2 Year

     

    Customers Who Bought This Item Also Viewed

    Camcor.com

    Contents of all material on these pages are ©1999-2019 Camcor, Inc. All Rights Reserved.

    hidden item