Presentation Products »
Projection Screens - Manual » Da-Lite
DA-LITE 84"x 84" Model C with CSR Projection Screen
|DA-LITE 84"x 84" Model C with CSR Projection Screen|
|Usually ships in 1-3 business days|
|Camcor Item No.||117055123|
|Mfg. Part No.||79860|
Today's Date: November 13, 2019
The most versatile screen surface and the premier choice when ambient light is controllable. It evenly distributes light over a wide viewing area while colors remain bright and life-like, with no shifts in hue. Screen surface can be cleaned with mild soap and water. Flame retardant and mildew resistant.
The Model C with CSR is a manual wall or ceiling mounted screen with Da-Lite's Controlled Screen Return (CSR).
CSR is a feature offered exclusively by Da-Lite to assist in the quiet controlled return of the screen into the case.
Provides great performance and smooth operation.
Matte White fabric up to and including 10' high will be seamless.
Glass Beaded fabric up to and including 8' high will be seamless.
Video Spectra 1.5, High Contrast Matte White and Silver Matte fabrics are available in sizes up to 8' high.
High Power fabric is available in sizes up to 9' x 12' and is seamless up to 6' high.
wall or ceiling mounting type.
To have Glass Beaded, Matte White, Video Spectra® 1.5, High Contrast Matte White, Silver Matte or High Power surface with black masking borders standard on flame retardant and mildew resistant fabric, mounted on a ball bearing rigid steel spring roller (1-3/4" diameter for 70" width, 3" diameter for 84" wide and over).
To be equipped with Controlled Screen Return (CSR) to control the return speed of the screen surface back into the case.
Fabric to be permanently attached to roller by metal clips on fabric edge being forced into groove in roller.
There shall be a clip every 3" along the fabric edge and double clips shall be used on the ends.
To have 22-gauge embossed steel case with flat back design finished with enamel.
To have powder coated steel end caps concealing roller ends with steel inner plates to support roller and provide added case strength.
End caps shall form sturdy brackets for wall or ceiling installations.
Bottom of screen shall be formed into pocket holding tubular metal slat.
An extruded aluminum saddle with zinc plated steel pull shall be attached to the slat by four screws on each end.
Heavy-duty plastic caps shall protect the ends of the slat.
Bumper stops shall be built into the case to prevent slat wedging inside case.
Matte White: Horizontal seams required when both dimensions exceed 10'.
Glass Beaded: Horizontal seams required when both dimensions exceed 8'.
Video Spectra 1.5, High Contrast Matte White and Silver Matte: Available in sizes where both dimensions do not exceed 8'.
High Power: Available in sizes up to and including 9' x 12'.
Horizontal seam required when both dimensions exceed 6'.
|Matte White, Glass Beaded, Video Spectra® 1.5 and High Contrast Matte White
||Horizontal seam required when both dimensions exceed 10'.
||84 in. x 84 in.
213 cm x 213 cm
|Overall Case Length
|Distance Between Hangers
||No. 6, 6" Non-adjustable extension brackets.
No. 11, 10" or 14" Non-adjustable extension brackets.
No Borders (Black masking borders standard).
Pull Rod (38" long)
All material ©2018 Camcor,
Inc. All Rights Reserved.