Nikon R1C1 Wireless Close-up Speedlight System

Nikon R1C1 Wireless Close-up Speedlight System
Camcor Item No.	131012135
Mfg. Part No.	4803

Nikon R1C1 Wireless Close-up Speedlight System

Enables superb close-up lighting control with exceptional flexibility and innovative options
For use with use with Nikon i-TTL SLRs without built-in Speedlights including D2X, D2HS, D2H and F6. Included SU-800 Wireless Speedlight Commander provides additional functionality with SB-800 and SB-600 Speedlights
Wireless control convenience
Producing desired close-up lighting effects is straightforward and uncomplicated
Features two SB-R200 Speedlights and the SU-800 Wireless Speedlight Commander
Up to three remote Groups and four Channels consisting of two SB-R200 Wireless Remote Speedlights can be arranged to enable creative lighting from the left, right, above or below the subject
Settings are easily confirmed on the SU-800 Wireless Speedlight Commander's LCD panel
SB-R200 Wireless Remote Speedlights can be tilted up to 60 degrees to accommodate lenses with short working distances
Flash compensation or Flash ratio control for desired lighting effects
SX-1 Master Attachment Ring accommodates up to eight SB-R200 Speedlights (off camera), up to four (on camera)
SB-800 and/or SB-600 Speedlights can be combined and controlled for additional creative lighting effects
Auto FP High-Speed Sync available (with compatible cameras)

(cc)

Specifications

SU-800 Wireless Commander Specifications

Transmission mode	Infrared communication
Transmission range	SB-800/SB-600; approximately 20 m (66 ft.) SB-R200; approximately 4 m (13 ft.) along the optical axis
Number of channels	Four
Number of groups	Three
Number of transmissions	Approximately 1,200
Transmission interval	Approximately 1 second
Transmission wavelength	800 - 1,000 nm
Flash coverage	Approximately 78 degrees horizontal and 60 degrees vertical
Display	LCD, ready light
AF-assist illuminator range	Approximately 10 m (33 ft.) at center area using a 50mm f/1.8 lens
Power source	One 3V CR123A lithium battery
Weight	Approximately 160g (5.6 oz.)
Dimensions (W x H x D)	Approximately 68 x 96 x 58 mm (2.7 x 3.8 x 2.3 in.)

SB-R200 Specifications

Electronic construction	Wireless remote flash unit with Automatic Insulated Gate Bipolar Transistor (IGBT) and series circuitry
Guide number	10/33 (ISO 100, m/ft.), 14/46 (ISO 200, m/ft.)
Angle of coverage	78 degrees horizontal, 60 degrees vertical
Flash modes	i-TTL, D-TTL, TTL (film-based cameras), M (manual)
Recycling time	6 seconds or less
Number of flashes	Approximately 290
Bounce capability	Flash head tilts down (toward optical axis) to 60 degrees with stops at every 15 degrees, and up (away from optical axis) to 45 degrees with stops at every 15 degrees
Flash duration	Approximately 600 micro-seconds
Mounting foot	Dedicated shoe for SX-1 Attachment Ring or AS-20 Speedlight Stand
Target light	White LED
Power source	One 3V CR123A lithium battery
Dimensions	Approximately 80 x 75 x 55 mm (3.1 x 3.0 x 2.2 in)(W x H x D)

Complete Outfit Includes

Items

(2) SB-R200 Wireless Remote Speedlights
SU-800 Wireless Speedlight Commander
SX-1 Attachment Ring
SS-MS1 Close-Up Speedlight Kit Case
(2) SS-R200 Soft Case
SS-SU800 Soft Case
SS-SX1 Soft Case
SG-31R IR Panel for Built-In Flash
SW-C1 Flexible Arm Clip
(2) SW-11 Extreme Close-Up Positioning Adapter
SW-12 Diffuser
SY-1-52 52mm Adapter Ring
SY-1-62 62mm Adapter Ring
SY-1-67 67mm Adapter Ring
SY-1-72 72mm Adapter Ring
SY-1-77 77mm Adapter Ring