Shure WB98H/C Clip On Condenser Instrument Microphone (Pre Amp Not Included)

Shure WB98H/C Clip On Condenser Instrument Microphone (Pre Amp Not Included)
Usually ships in 1-3 business days
Camcor Item No.	136017089
Mfg. Part No.	WB98H/C

The Shure WB98H/C is a premium cardioid condenser instrumental microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the microphone to be easily positioned and secured in place, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.

Features

Tailored frequency response for studio quality performance

Wide dynamic range for use in high SPL environments

Uniform supercardioid pattern for high gain before feedback and superior rejection of off-axis sound

Optional A98D drum mount is unobtrusive and versatile--allows precise positioning of the microphone while holding it firmly in place

Compact design reduces stage clutter

Detachable cable for easy storage

Interchangeable microphone cartridges with different polar patterns are available

Legendary Shure quality, ruggedness, and reliability

10 ft. cable terminated to 4-Pin Mini-Connector

Specifications

Type	Condenser (electret bias)
Frequency Response	20 to 20,000 Hz
Polar Pattern	Supercardioid (as supplied), uniform with frequency, symmetrical about axis. Cartridge for cardioid polar pattern also available.
Output Level (at 1,000 Hz)	Open Circuit Voltage: -59 dBV/Pa* (1 mV) typical *1 Pa = 94 dB SPL
Maximum SPL	(20 Hz to 20 kHz, less than 1% THD) 2.5 kilohm load: 160 dB 1 kilohm load: 156 dB
Dynamic Range	(at 20 Hz to 20 kHz, less than 1% THD, 2.5 kilohm load) 125 dB (max SPL minus A-weighted noise)
Output Noise	35 dB SPL, A-weighted
Signal-to-Noise Ratio	59 dB re 94 dB SPL
Output Impedance	Rated at 150 ohms (actual) Recommended minimum load impedance: 1 kilohm
Hum Pickup	-7.5 dB equivalent SPL in 1 mOe field (60Hz)
Polarity	Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Phantom Power	48 Vdc +/- 4 Vdc(IEC-268-15/DIN 45 596), positive pins 2 and 3
Cable	BETA 98/S: 7.6 m (25 ft) light-weight, two-conductor shielded, TA4F to TA3F mini connectors BETA 98D/S: 4.6 m (15 ft) heavy-duty, two-conductor shielded, TA4F to TA3F mini connectors
Case	Microphone: Matte black enamel brass case and stainless steel inner grille
Dimensions	Microphone: 11.7 mm X 35.6 mm (0.46 in. X 1.40 in.)
Net Weight	Microphone: 12 g (0.4 oz) less cable