Shure A96F Lo Z XLRJ - Med Z MP Cable DC Filter

Shure A96F Lo Z XLRJ - Med Z MP Cable DC Filter
Camcor Item No.	SHUA96F
Mfg. Part No.	A96F

The A96F transformer connects microphones with an XLR-type connector to the 3.5 mm (9/64 inch) inputs found on camcorders and other recording devices. It increases the signal level from the microphone, provides a balanced input, and prevents distortion due to the d.c. bias typically found in camcorder microphone inputs.

The A96F can be modified for microphones rated at 150 ohms. This modification is only necessary if the output level from the A96F is insufficient for your recording device.

A96F - Camcorder Interface, Low-to-Medium Line Matching Transformer, Low Impedance Female XLR to Medium Impedance Mini Plug on Attached 2-foot (0.6 m) Cable, DC Bias Filter

Specifications

Frequency Response	20 to 20,000 Hz +- 2 dB
Impedance	Low impedance: 600 ohms(supplied) or 150 ohms Medium impedance: 2,500 ohms
DC Resistance	Low impedance: 600 ohms winding: 56 ohms 150 ohms winding: 28 ohms Medium impedance: Open Circuit
Voltage Ratio @ 600 ohms	Low impedance to medium impedance: +6 dB
Voltage Ratio @ 150 ohms	Low impedance to medium impedance: +12 dB
Maximum Recommended Input Levels	Source Impedance: 150 ohms Winding Being Driven: 150 ohms Maximum Level: 0.5 V Source Impedance: 600 Ohms Winding Being Driven: 600 Ohms Maximum Level: 1.0 V Source Impedance: 2,500 ohms Winding Being Driven: 2,500 ohms Maximum Level: 2.0 V
Case	Full magnetic shield, steel with gray enamel finish
Dimensions	19 mm (3/4 in.) diameter; 89 mm (3 1/2 in.) long