Chief RPA Projector Mount **TOP ONLY** at Camcor.com

Chief RPA Projector Mount TOP ONLY
Usually ships in 1-3 business days
Camcor Item No.	115022148
Mfg. Part No.	RPA000

Top only - SLB Bracket not included.
Chief’s RPA Series Inverted Ceiling Mount with the exclusive All-Points™ Security System is the top-selling projector mount in the industry! More RPA Series Mounts are installed in offices, schools and homes than any other mount. Why is the RPA so popular? Because it gives you everything you need for a quick installation, low-profile look and hassle-free projector maintenance. Also, a winner in the Media & Methods 2003 Awards Portfolio for making a significant contribution to the school market.

(cc)

Features

Low-profile, aesthetic design

Quick projector disconnect/reconnect

Steel-into-steel construction

UL listed for proven strength

Easy installation - no assembly

Independent roll, pitch and yaw adjustments make it easy to precisely register the projector

Disconnect without affecting adjustments

Convenient lamp and filter access

All-Points™ Security System included at no additional cost (not available with all RPA Series Mounts)

Three ceiling mounting methods

Flush mount without disassembly

Allows cables to be routed through the top of the mount without additional accessories

Compatible with a large assortment of accessories to easily overcome a variety of installation challenges

Allows lateral shift by adding the LSB-100 Lateral Shift Accessory

Compatible with the PG-1 Projector Guard™ Security Cage

Allows natural convection ventilation

Specifications

Roll Adjustment: +/-4º adjustment up or down. Loosen screw, adjust mount and tighten screw to hold adjustment.
Pitch Adjustment: +/-25º adjustment on each side of the mount. Loosen screw, adjust mount and tighten screw to hold adjustment. Full range of pitch in a flush mount installation.
Yaw Adjustment: 360º by turning the mount on the threaded column and securing in place with set screw. 12º yaw possible on flush mount using slots in top of RPA.
Color: Black
Column: 1.5" NPT
Weight Capacity: 50 lbs.
Three Mounting Methods:

Flush mount to suitable ceilings using the four corner slots in top of the RPA Mount. The RPA allows you to flush mount without disassembly by providing suitable access for screwdrivers and socket sets. +/-25º of pitch when flush mounted. 12º yaw possible on flush mount with slots in top of RPA (Hardware not included).
1/4" Threaded Rod using the four corner slots in the top of the RPA. (Threaded rod not included).
1-1/2" NPT Threaded Extension Column using the threaded opening at the top of the RPA Mount. (Threaded Extension Column not included).

Convenient Lamp and Filter Access: Custom design of most RPA projector brackets provides needed access for: quick lamp changes, easy filter cleaning and proper projector ventilation.
Quick Projector Disconnect/Reconnect: To quickly and easily remove the projector from the ceiling: loosen thumbnuts connecting the SLB bracket to the universal top. Remove projector and SLB from universal top. The universal top retains the registration adjustments. This feature makes projector servicing and maintenance quick and easy by eliminating the need for re-registration. Security wrench included for use when thumbnuts are replaced with All-Points™ Security System hardware.