Samson SADK7 7pc Kit Drum Mic Kit at Camcor.com

Samson SADK7 7pc Kit Drum Mic Kit
Camcor Item No.	323019851
Mfg. Part No.	SADK707

Samson 7 Kit - 7 Piece Drum Microphone Kit - Includes: (1) Q-Kick, (1) Q-Snare, (3) Q-Tom and (2) C02 Pencil Microphones with Clips and Storage Case

The Samson 7 Kit is a convenient 7 piece microphone kit specifically designed for capturing drums kits. The deluxe kit is a cost effective solution to capturing drums in live sound reinforcement and recording applications. The kit includes the Samson Q-Kick bass drum microphone, Q-Snare microphone, 3 Q-Tom microphones and a pair of C02 pencil condenser microphones for overheads and cymbals. In addition to the microphones, all necessary mounting clamps and microphone stand mounts are packaged in a handsome, rugged storage case.

Features

Complete Kit
The 7 Kit is an all-in-one solution for capturing drums in sound reinforcement and recording studios. The kit is complete with everything necessary to capture kick drum, snare drum, toms and cymbals.

C02 Pencil Microphones
The C02 condenser pencil microphones provide an extended frequency response and excel when used to capture overheads.

Neodymium Elements
The Q-Kick, Q-Snare and Q-Tom microphones employ neodymium elements that provide high output gain and exceptionally low noise floor.

Included Mounting Hardware
The included DMC100 clamp style mounts and stand mounts provide flexible, unobtrusive microphone placement.

Tight Supercardioid Polar Patterns
The supercardioid polar pattern provides maximum rejection of off-axis noise and audio that may cause feedback and leakage.

Specifications

General

Transducer	Q Kick: Dynamic Q Snare: Dynamic Q Tom: Dynamic C02: Condenser
Polar Pattern	Q Kick: Supercardioid Q Snare: Supercardioid Q Tom: Supercardioid C02: Cardioid
Frequency Response	Q Kick: 50Hz to 16kHz Q Snare: 50Hz to 16kHz Q Tom: 50Hz to 16kHz C02: 40Hz to 20kHz
Dynamic Range (Typical)	C02: 112dB
Signal-to-Noise Ratio	C02: 22dB (A weighted IEC/DIN 651)
Maximum Input Sound Level	Q Kick: 147dB (THD -/< 0.5% 1000Hz) Q Snare: 133dB (THD -/< 0.5% 1000Hz) Q Tom: 133dB (THD -/< 0.5% 1000Hz) C02: 134dB (THD -/< 0.5% 1000Hz)
Power Requirements	C02: 48V Phantom Power
Output Impedance	Q Kick: 200 ohms Q Snare: 200 ohms Q Tom: 200 ohms C02: 200 ohms
Output Connectors	3-pin XLR male
Pad	No
Low Frequency Roll-Off	No
Dimensions	manufacturer has published dimensions for the C02 only C02: 79 x 5.9" (20 x 150mm) (Diameter x Length)
Weight	Q Kick: 13.05oz (370g) Q Snare: 5.29oz (150g) Q Tom: 5.29oz (150g) C02: 5.99oz (170g)