Samson SZONE 4 Channel/4 Zone Stereo Mixer at Camcor.com

Samson SZONE 4 Channel/4 Zone Stereo Mixer
Camcor Item No.	323019911
Mfg. Part No.	SA-SZONE

Samson SZONE 4 Channel/4 Zone Stereo Mixer with 2 Mic/Line Inputs with Ducking and 2 Stereo Line Inputs via Euroblock Output Connectors

The Samson S-Zone is a 4 zone stereo mixer designed for fixed installation in bars, restaurants, clubs, offices, schools and more. The mixer is designed with 4 inputs that are completely assignable to any of the 4 output zones. The result is an audio matrix, routing system that can isolate audio in specific areas within a venue. 2 balanced microphone and 4 balanced aux/line inputs are featured. A ducking feature provides a "talk over" effect while paging or announcing over music. The front panel features a volume control for each input and output zone, high and low tone controls are provided for each output zone. A built-in monitor speaker and headphone output are featured for monitoring any of the output zones. A convenient single rack-space enclosure make the S-Zone an ideal solution for fitness clubs, houses of worship, retail stores, lounges, etc.

Features

Multi Zone Isolation
The Samson S-Zone features 4 inputs and 4 output zones. Input channels 1 through 4 are assignable to any of the output zones, isolating audio in separate areas.

Built In Speaker Monitor
A built in speaker and headphone monitor output can be assigned to monitor any of the output zones.

Ducker Feature
A ducker is assigned to the microphone inputs and provides a "talk over" effect when paging or making announcements over music or program material.

Euroblock Connections
The rear panel connectors are Euroblock style for a trust worthy, solid connection to and from signal sources.

Specifications

General

Total # Of Inputs	4 - Balanced via Euroblock connector, see manual for wiring configuration
Mic/Line Inputs	2 - Mic / Stereo Inputs via Euroblock connector, see manual for wiring configuration
Stereo Line Inputs	2 - Stereo Inputs RCA Type via Euroblock connector, see manual for wiring configuration
In-Line Inputs/Returns	No
AUX Sends	No
AUX Returns	No
Inserts	No
BUS (Group) Outputs	4 - Balanced
2 Trk Master I/O	No
ALT I/O	No
Monitor Outputs	1/4" Phone - Headphone Output Internal Speaker
EQ Section	Tone Controls: Low: +/- 15dB @ 100Hz High: +/- 15dB @ 10kHz
Solo/Mute	Zone 1 - 4 assignment controls
Channel Level Control	Rotary POTS Zone Input and Output Controls
Trim/Gain Control	No
Phantom Power	+12 VDC
Metering	7 Segment Peak LEDs (Zone Outputs 1 through 4)
Frequency Response	not specified by manufacturer
Dynamic Range	not specified by manufacturer
Signal-to-Noise Ratio	96 dB
Total Harmonic Distortion (THD)	<. 02% CMRR: >52 dB (Mic)
Power Supply	USA/Canada ~ 120V AC, 60Hz Fuse: 100-120V AC; 250 mA (slow-blow) Power Consumption: 5 Watts Power Inlet: Standard IEC Receptacle with Fuse
Dimensions	19 x 7.5 x 1.75" (482 x 190 x 44mm) (WxDxH)
Weight	5.1 lb. (2.31 kg)