Nikon Camera Control Pro 2 Software (Full Version)

Nikon Camera Control Pro 2 Software (Full Version)
Camcor Item No.	131012322
Mfg. Part No.	25366

Nikon Camera Control Pro 2 Software (Full Version)

Nikon Camera Control Pro 2.0 software remotely controls most functions of Nikon digital SLRs from a computer that is connected via USB cable or though wired or wireless LAN using a wireless transmitter. Advanced functions of the new D3 and D300 cameras such as the Viewer for preview and selection of images prior to transfer, LiveView function and PictureControl System are also supported, along with the workflow of Nikon's exclusive photofinishing software Capture NX (optional) and the browser and viewer software View NX.

Features

Take Control of Your Photography—Remotely: Using the included USB or Firewire cable and/or optional WiFi adapters for select models, Nikon Camera Control Pro enables you to capture unique images no matter what the subject.

Picture Control Utility: In certain Nikon digital SLRs such as the D3, D700 and D300, customized image adjustment, including tone compensation curve data, can be saved to tailor the camera’s behavior to the photographer’s vision, improving efficiency when using multiple cameras at the same time.

LiveView support: Live previews direct from the camera are supported on the D3 and D300 when this feature is enabled. See what you are about to shoot!

Compatible with WiFi operation: In addition to supporting USB cable connections, Camera Control Pro offers compatibility with the optional wireless transmitter models WT-2a, WT-3a and WT-4a. When attached to a digital SLR, the WT-2a, WT-3a and WT-4a enable remote shooting and setting via a wireless LAN over WiFi.

Improved graphic user interface: A simulated (camera) LCD panel on the computer screen performs the same function as the camera’s viewfinder display which has been modified to be consistent with those used in the latest cameras for smoother operation.

Compatible with Nikon's Image Authentication Function: Image data can be transferred and stored without affecting the authentication function.

Specifications

System Software/Requirements

Windows System	• Pentium 300MHz or higher CPU recommended • Windows 2000 & XP • 256MB RAM (768MB or more recommended) • 50MB Hard disk space required for installation, plus 1GB of free disk space to run software • 800 x 600 pixels or more Display with 16-bit color • Built-in USB* port or FireWire** (IEEE1394) Port • CD-ROM drive required for installation • Internet connection required for Nikon Message
Macintosh System	• PowerPC G3/G4/G5 CPU • Mac OS X (10.3.9 or later) • 256MB RAM (768MB or more recommended) • 50MB Hard disk space required for installation • 800 x 600 pixels or more Display with 16-bit color • Built-in USB or FireWire Port • CD-ROM drive required for installation • Internet connection required for Nikon Message * Operation is not guaranteed when connection has been made to a USB hub.  **Only OHCI-compliant boards supported.
Supported Cameras	D3 D2Xs D2X D2Hs D700 D300 D200 D100 D80 D70s D70 D60 D50 D40X D40 Note: The D1X, D1H, and D1 not supported on computers with Intel CPUs running Mac OS X ver.10.3.9
RAM (Memory)	256MB or more (512MB or more with Windows Vista) , 768MB or more recommended.
Hard Disk Space	Requires 1GB or more for running.
Monitor	1,024 x 768 pixels or more  24-bit color (True Color) or more
Interface	USB: Only built-in USB ports supported  IEEE 1394: Only OHCI-compliant boards supported Note: Operation when connected with USB Hub device or IEEE 1394 Hub device is not guaranteed.