Kramer VP-701XL UXGA Scan Converter at Camcor.com

Kramer VP-701XL UXGA Scan Converter
Usually ships in 1-3 business days
Camcor Item No.	384051168
Mfg. Part No.	VP-701XL

Kramer VP-701XL UXGA Scan Converter

The VP-701xl is a scan converter for computer graphics video signals. It converts a computer graphics video signal up to 2048x2048 or an HDTV signal to two composite and two s-Video (Y/C) signals simultaneously in either PAL or NTSC formats.

Features

AutoTrak™ Auto Set Up Technology - One button auto setup that automatically sizes, shifts, and centers any input image on the display device.

Multi-Standard Output - PAL or NTSC (selectable).

Input Compatibility – Up to 2048x2048 and 1080p HD.

Looping Input.

HDTV Compatible.

Output - 2 CV on BNC connectors, 2 Y/C on 4p connectors.

Flicker Reduction - 2, 4 or 6-line Flicker reduction (selectable).

Freeze Frame.

Front Panel Control Lockout.

Aspect Ratio - 3 settings.

10x Zoom & Pan - to 1000%.

Desktop Size - Compact size. Can be rack mounted in a 1U rack space with the optional RK-701xl adapter.

Specifications

General

Computer Input	Analog RGB/YPbPr on 15-Pin HD connectors into 75Ω, supporting RGBHV, RGsB, YPbPr, auto-terminating into 75Ω Digital sync (in RGBHV mode): TTL Level, 10K termination, pos or negative Analog sync (in RGsB, YPbPr, YUV modes): 0.3V negative. RGB Level Range: 0.5-2.0Vpp Scan Rate Detection: automatic PC Resolutions: any up to 2048x2048 HDTV Resolutions: any up to 1080p Max horizontal scan rate: 150kHz
Video Output	Composite Video 1Vpp on BNC connectors. S-Video (YC) 1Vpp on 4-pin mini-DIN connectors CV/YC Video encoder: 8/10-bit Digital Output impedance 75Ω Television standards supported: NTSC and PAL.
Computer Outputs	RGBHV loop
Control Methods	The unit can be controlled locally via the front panel buttons and on-screen display (OSD) or remotely via the Infrared remote using the Infrared remote unit.
Scaling / Sampling / Memory	Size and position: automatic via AutoSet or Manual Image size: user-definable presets Image freeze: one video frame Settings memory: non-Volatile Zoom range: variable to 10x Zoom (1000%) Firmware memory: flash, upgradeable via RS-232
Power Requirement	External power supply: 12V DC @1A maximum. Actual current consumption varies between units. Internal over-voltage & over-current protection. Full PSU specification: 12V DC regulated 1Amp PSU with a 2.5mm locking center-pin positive DC power connector. A non-locking 2.5mm DC power connector will also fit.
Weight	1.8kg (3.97lbs) approx.
Dimensions	18.4cm x 10.2cm x 3.2cm (7.25” x 4” x 1.25” ) W, D, H