Audio Technica AT-8035 Shotgun Microphone

Audio Technica AT-8035 Shotgun Microphone
Camcor Item No.	215009798
Mfg. Part No.	AT8035

Audio Technica AT-8035 Shotgun Microphone

The length (14.53") of the AT8035 Line + Gradient Condenser Microphone is well-suited for ENG, outdoor recording and other specialized uses. The microphone is designed for video production and broadcast (ENG/EFP) audio acquisition. Suited for both boom & handheld use, it provides the narrow acceptance angle desirable for long-distance sound pickup, featuring excellent sound rejection from the sides and rear of mic and switchable low-frequency roll-off. It operates on battery or phantom power.

Features

Designed for video production and broadcast (ENG/EFP) audio acquisition

Length is well-suited for ENG, outdoor recording and other specialized uses

Provides the narrow acceptance angle desirable for long-distance sound pickup

Excellent sound rejection from the sides and rear of mic

Switchable low-frequency roll-off

Operates on battery or phantom power

RoHS compliant—free from all substances specified in the EU directive on hazardous substances

Specifications

General

Element	Fixed-charge back plate, permanently polarized condenser
Polar Pattern	Line + gradient
Frequency Response	40-20,000 Hz
Low-Frequency Roll-Off	80 Hz, 12 dB/octave
Open Circuit Sensitivity	Phantom: –38 dB (12.5 mV) re 1V at 1 Pa Battery: –39 dB (11.2 mV) re 1V at 1 Pa
Impedance	Phantom: 250 ohms Battery: 300 ohms
Maximum Input Sound Level	Phantom: 132 dB SPL, 1 kHz at 1% T.H.D. Battery: 120 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range (Typical)	Phantom: 110 dB, 1 kHz at Max SPL Battery: 98 dB, 1 kHz at Max SPL
Signal-To-Noise Ratio	72 dB, 1 kHz at 1 Pa
Phantom Power Requirements	11-52V DC, 2 mA typical
Battery Type	1.5V AA/UM3
Battery Current / Life	0.4 mA / 1200 hours typical (alkaline)
Switch	Flat, roll-off
Weight	170 g (6.0 oz)
Dimensions	369.0 mm (14.53") long, 21.0 mm (0.83") diameter
Output Connector	Integral 3-pin XLRM-type
Accessories Furnished	AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8132 windscreen; battery; protective carrying case