Tripp Lite PowerVerter APS X APSX750 Power Inverter/Charger at Camcor.com

Tripp Lite PowerVerter APS X APSX750 Power Inverter/Charger
Camcor Item No.	323900861
Mfg. Part No.	APSX750

Tripp Lite's APSX750 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 750 watts of continuous 230V AC power to 2 AC outlets from any 12V battery or automotive DC source. OverPower inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes and DoubleBoost inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3-stage, selectable 5/20 amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design, with frequency control powers resistive electronic loads or

Specifications

General Information
Manufacturer	Tripp Lite
Brand Name	Tripp Lite
Product Line	PowerVerter
Product Series	APS X
Product Model	APSX750
Product Type	Power Inverter
Technical Information
Plug/Connector Type	IEC 60320 C14
Receptacles	2 x IEC 320 EN 60320 C13
Status Indicators	Front Panel LEDs: Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported)
Power Description
Input Voltage	12 V DC 230 V AC
Input Voltage Range	10 to 15 V DC
Output Voltage	230 V AC ±5% Nominal 12 V DC Nominal
Frequency	50 Hz ±0.3Hz
Input Current	72 A @ 12 V DC 6.20 A @ 230 V AC
Load Capacity	750 W Continuous Power / 1.50 kW Peak Power
Waveform Type	Pulse-width Modulated Sine Wave
Switching Time	6 ms
Environmental Conditions
Temperature	32°F (0°C) to 104°F (40°C) Operating
Humidity	0% to 95% Non-condensing Relative Humidity Operating
Physical Characteristics
Color	Black
Power Cord/Cable	72" Input
Dimensions	9" Height x 8.75" Width x 9" Depth
Weight (Approximate)	18.60 lb
Miscellaneous
Additional Information	Frequency control for operating stability RJ45 port allows connection of APS/PowerVerter Remote Switch Switch allows user to select between off, auto-invert and charge-only settings Advanced 20 amp, 3-stage battery charger and selector switch for gel or wet cell batteries Coated internal circuit boards offer continuous operation in humid environments (0-95%, non-condensing) Configuration switches to allow the user to select the low voltage for the unit to automatically transfer from AC power to battery backup Low voltage transfer to battery power: User configurable to 144V, 163V, 182V & 201V Overload protection: Includes 3A input breaker dedicated to the charging system and 4A output breaker for AC output loads DC Input Voltage: 12 VDC AC Input Voltage: 230 VAC DC Charger Output Voltage: 12 VDC AC Output Voltage: 230 VAC AC Plug Type: IEC-320 C14 DC Plug Type: Set of 2 DC bolt-down terminals Outlet/Receptacle Type: IEC-320 C13
Package Contents	PowerVerter APS X APSX750 Power Inverter/Charger APSX750 Inverter/Charger Instruction manual with warranty information
Compatibility	Compatible with marine, automotive, telecom, computer, emergency and a variety of other applications