Shure VP89S Short End-Address Shotgun Condenser Microphone w/ Case and Foam Windscreen

Shure VP89S is a professional shotgun condenser microphone for use in critical broadcast and media production applications. Designed with interchangeable long, medium, and short capsules, the VP89 models provide scalable, superior off-axis rejection for focus and flexibility in a wide variety of on-site locations.

Shure VP89S Short End-Address Shotgun Condenser Microphone w/ Case and Foam Windscreen
Usually ships in 1-3 business days
Camcor Item No.	136017366
Mfg. Part No.	VP89S

Features

State-of-the-art preamplifier redesign

Superior RF immunity

Internal low-frequency roll-off

Recessed low-cut filter switch for additional control

Smaller footprint

Superior Shure design and rugged, roadworthy construction

High volume, widest aperture for greatest degree of ambiance in near-field target range (camera mounting, discreet mounting)

Wide pickup angle

Unmatched quality of off-axis rejection

Case & Foam Windscreen

Specifications

Cartridge Type	Electret Condenser
Polar Pattern	Hypercardioid / Lobar
Frequency Response	140–20,000 Hz
Output Impedance	115.0 Ohms
Sensitivity (open circuit voltage, @ 1 kHz, typical)	-33.5 dBV/Pa (2.11 mV)
Maximum SPL (1 kHz at 1% THD)	2500 Ohms load: 132.0 dB SPL 1000 Ohms load: 128.5 dB SPL
Signal-to-Noise Ratio	79.0 dB
Dynamic Range (@ 1 kHz)	2500 Ohms load: 117.0 dB 1000 Ohms load: 113.5 dB
Clipping Level (@ 1 kHz, 1% THD)	2500 Ohms load: 4.0 dBV 1000 Ohms load: 0.0 dBV
Self Noise (equivalent SPL, A-weighted, typical)	15.0 dB
Common Mode Rejection	20–20,000 Hz ≥ 70.0 dB
Low-Frequency Filter Switch	-12 dB / oct below specified frequency
Flat Response	100 Hz
Low Frequency Roll-off	200 Hz
Operating Temperature Range	-18°C (0°F) to 57°C (135°F)
Storage Temperature Range	-29°C (-20°F) to 74°C (165°F)
Operating Relative Humidity	0 to 95%
Polarity	Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Housing	Charcoal-grey metallic painted aluminum alloy handle and grille with stainless steel screen
Power Requirements	11–52 V DC phantom power (IEC-61938), <2.0 mA
Net Weight	4.1 oz
Barrel Length	5.41 in