Frequency Response | 50 to 17,000 Hz |
Polar Pattern | Supercardioid |
Output Impedance | EIA Rated at 150 ohms (180 ohms actual) |
Sensitivity (at 1 kHz, open circuit voltage) | Supercardioid Cartridge: -26.5 dBV/Pa (47.3 mV) 1 Pascal=94 dB SPL |
Maximum Sound Pressure Level (1 kHz at 1% Total Harmonic Distortion, 1 k ohm load) | Supercardioid: 116.0 dB |
Signal to Noise Ratio (referenced at 94 dB SPL) | Supercardioid: 72.0 dB |
Equivalent Output Noise (A-weighted) | Supercardioid: 22.0 dB SPL |
Dynamic Range | 94.0 dB |
Common Mode Rejection | 45 dB minimum, 10 Hz to 100 kHz |
Switch Attenuation | 50 dB minimum |
Preamplifier Output Clipping Level | -6 dBV (0.5 V) |
Polarity | Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector. |
Logic Connections (MX392 Only) | LED IN: Active low ( < 1.0v), TTL compatible. Absolute maximum voltage: -0.7V to 50V.
SWITCH OUT: Active low ( < 0.5V), sinks up to 20mA, TTL compatible. Absolute maximum voltage: -0.7V to 24V (up to 50V through 3 k ohms). |
Power Requirements | 11 to 52 Vdc phantom 2.0 mA current consumption |
Environmental Requirements | Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F) Relative Humidity: 0 to 95% |