Shure MX405/C 5" Shock-Mounted Gooseneck Cardioid Microphone w/ Surface Mount PreAmp at Camcor.com

Shure MX405/C 5" Microflex® Modular Gooseneck microphone delivers unsurpassed style, flexibility and performance for conference rooms and similar applications. Offering desktop or mounted bases, wired or wireless options, and even interchangeable cartridges, it’s easy to get the perfect fit for your conferencing installation. Fully compatible with SLX® Wireless Systems when used with MX890 Wireless Desktop Base.

Shure MX405/C 5" Shock-Mounted Gooseneck Cardioid Microphone w/ Surface Mount PreAmp
Camcor Item No.	136017396
Mfg. Part No.	MX405/C

Features

Available in 5" (12.7 cm), 10" (25.4 cm), and 15" (38.1 cm) lengths

Cardioid polar patterns

Bi-color status indicator or single color light ring

Programmable mute switch (desktop models only)

Logic input/output for remote LED and mute control

Surface-mount and wired or wireless desktop base options

CommShield® Technology for improved RF filtering

Specifications

Type	Condenser (electret bias)
Frequency Response	50 to 17000 Hz
Polar Pattern	Cardioid
Output Impedance	EIA Rated at 150 Ohms (170 Ohms actual)
Output Configuration	Active balanced
Sensitivity (at 1 kHz , open circuit voltage)	Cardioid: -35 dBV/Pa (18 mV)
Maximum SPL (1 kHz at 1% THD, 1 kilohm load)	Cardioid: 121 dB
Equivalent Output Noise (A-weighted)	Cardioid: 28 dB SPL
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz)	Cardioid: 66 dB
Dynamic Range (1 kilohm load at 1 kHz)	3 dB
Common Mode Rejection (10 Hz to 100 kHz)	45 dB minimum
Preamplifier Output Clipping Level (1% THD)	-8 dBV (0.4 V)
Polarity	3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector 5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector
Net Weight	0.119 lbs
Logic Connections	LED IN: Active low (≤1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V LOGIC OUT: Active low (≤1.0V), syncs up to 20mA, TTL compatible Absolute maximum voltage: -0.7V to 50V (up to 50V through 3 kilohms)
Mute Switch Attenuation	-50 dB minimum
Cable	MX400DP: 20 ft attached cable with shielded audio pair terminated at a 3-pin male XLR and three unterminated conductors for logic control
Environmental Conditions	Operating Temperature: -18 to 57 deg. C (0 to 135 deg. F) Storage Temperature: -29 to 74 deg. C (-20 to 165 deg. F) Relative Humidity: 0 to 95%
Power Requirements	48 to 52 Vdc phantom, 8.0 mA