Shure MX412/N 12" Gooseneck Microphone w/ Attached XLR PreAmp (No Cartridge)

Shure MX412/N 12" Gooseneck Microphone w/ Attached XLR PreAmp (No Cartridge)
Usually ships in 1-3 business days
Camcor Item No.	136017414
Mfg. Part No.	MX412/N

Shure MX412/N standard gooseneck microphone comes with an attached XLR PreAmplifier. Designed for easy replacement it can be fitted with cardioid, supercardioid, and omnidirectional polar patterns. The interchangeable cartridges provide a wide frequency response and accurate sound reproduction for a wide variety of applications. Condenser cartridges fit every model in the Mixroflex product line for enhanced convenience and consistent sound.

Features

12" Gooseneck

Interchangeable cartridges provide the right polar pattern for every application (No Cartridge on MX412/N)

Snap-fit foam windscreen

Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum

Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs

Shock mount provides over 20 dB isolation from surface vibration noise

Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables

Specifications

Frequency Response	50 to 17,000 Hz
Output Impedance	180 ohms actual (EIA rated at 150 ohms)
*Sensitivity (At 1,000 Hz, open circuit voltage)**
Maximum SPL (1 kHz at 1% THD, 1 kilohm load)
Equivalent Output Noise (A-weighted)
Signal to Noise Ratio (referenced at 94 dB SPL)
Dynamic Range at 1 kilohm load 96.2 dB	100 dB at 0 gain
Common Mode Rejection	45.0 dB minimum
Preamplifier Output Clipping Level (1% THD)	-6.0 dBV (0.5 V) -12 dBV at 0 gain
Polarity	Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector
Power Requirements	11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements	Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F) Relative Humidity: 0 to 95%