Computers & Printers »
Cables, Adapters, Assemblies » Shure
Shure MX412SE/N 12" Standard Gooseneck Condenser Microphone (No Cartridge) |
Usually ships in 1-3 business days |
Camcor Item No. | 136017417 |
Mfg. Part No. | MX412SE/N |
Today's Date: April 30, 2025
Shure MX412SE/N 12" Microflex® Standard Gooseneck microphone brings a whole new meaning to the word flexible with its fully adjustable gooseneck. Designed for easy replacement and available in cardioid, supercardioid and omnidirectional polar patterns, the interchangeable cartridges offer wide frequency response and accurate sound reproduction for a wide variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the Microflex product line for enhanced convenience and consistent sound.
MX412SE/N includes 12" In-Line Preamp, Shock & Flange Mount, 10' Side- (or Bottom-) Exit Cable, Snap-Fit Foam Windscreen. Microphone cartridge not included.
Features
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum Interchangeable cartridges provide the right polar pattern for every application Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs Shock mount provides over 20 dB isolation from surface vibration noise Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables Snap-fit foam windscreen Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table
12" In-Line Preamp 10' Side- (or Bottom-) Exit Cable
Specifications
Frequency Response | 50 to 17,000 Hz | Output Impedance | 180 ohms actual (EIA rated at 150 ohms) | Sensitivity (At 1,000 Hz, open circuit voltage*) | | Maximum SPL (1 kHz at 1% THD, 1 kilohm load) | | Equivalent Output Noise (A-weighted) |
| Signal to Noise Ratio (referenced at 94 dB SPL) |
| Dynamic Range at 1 kilohm load 96.2 dB | 100 dB at 0 gain | Common Mode Rejection | 45.0 dB minimum | Preamplifier Output Clipping Level (1% THD) | -6.0 dBV (0.5 V) -12 dBV at 0 gain | Polarity | Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector | Power Requirements | 11 to 52 Vdc phantom, 2.0 mA | Environmental Requirements | Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F) Relative Humidity: 0 to 95% | |
All material ©2025 Camcor,
Inc. All Rights Reserved.