Computers & Printers »
Cables, Adapters, Assemblies » Shure
Shure MX418SE/S 18" Standard Gooseneck Supercardioid Microphone |
Usually ships in 1-3 business days |
Camcor Item No. | 136017418 |
Mfg. Part No. | MX418SE/S |
Today's Date: April 30, 2025
Shure MX418SE/S Microflex® Standard Gooseneck microphone brings a whole new meaning to the word flexible with their fully adjustable gooseneck. Designed for easy replacement, MX418SE/S is available in a supercardioid polar pattern. The interchangeable cartridges offer wide frequency response and accurate sound reproduction for a wide variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the Microflex product line for enhanced convenience and consistent sound.
MX418SE Includes 10' Side- (or Bottom-) Exit Cable. 18" In-Line Preamp, Shock & Flange Mount, 10' Side- (or Bottom-) Exit Cable and Snap-Fit Foam Windscreen. Versatile to meet many needs.
Features
Includes 10' (3 m) Side- (or Bottom-) Exit Cable 18" In-Line Preamp 10' Side- (or Bottom-) Exit Cable Snap-Fit Foam Windscreen
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum Interchangeable cartridges provide the right polar pattern for every application Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs Shock mount provides over 20 dB isolation from surface vibration noise Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tablesSnap-fit foam windscreen Supplied shock mount for more than 20 dB isolation from surface transmitted noise
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table
Specifications
Frequency Response | 50 to 17,000 Hz | Output Impedance | 180 ohms actual (EIA rated at 150 ohms) | Sensitivity (At 1,000 Hz, open circuit voltage*) | Supercardioid: -33.5 dBV/Pa (21.1 mV) All values -12 dB at 0 gain *1 Pascal = 94 dB SPL | Maximum SPL (1 kHz at 1% THD, 1 kilohm load) | Supercardioid: 122.7 dB All values +6 dB at 0 gain | Equivalent Output Noise (A-weighted) | Supercardioid: 26.5 dB SPL | Signal to Noise Ratio (referenced at 94 dB SPL) | Supercardioid: 67.5 dB | Dynamic Range at 1 kilohm load 96.2 dB | 100 dB at 0 gain | Common Mode Rejection | 45.0 dB minimum | Preamplifier Output Clipping Level (1% THD) | -6.0 dBV (0.5 V) -12 dBV at 0 gain | Polarity | Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector | Power Requirements | 11 to 52 Vdc phantom, 2.0 mA | Environmental Requirements | Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F) Relative Humidity: 0 to 95% | |
All material ©2025 Camcor,
Inc. All Rights Reserved.