Shure MX412/S Standard Gooseneck Supercardioid Condenser Microphone

Shure MX412/S Standard Gooseneck Supercardioid Condenser Microphone
Camcor Item No.	136017420
Mfg. Part No.	MX412S/S

Shure MX412S/S Microflex® Standard Gooseneck microphone brings new meaning to the word flexible with a fully adjustable gooseneck. MX412/S includes a supercardioid polar pattern that is interchangeable with cardioid or omnidirectional cartridges, offering frequency response and accurate sound reproduction for a wide variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the Microflex product line for enhanced convenience and consistent sound.

MX412S/S includes Mute Switch and LED Indicator, 12" Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen.

Features

Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum

Interchangeable cartridges provide the right polar pattern for every application

Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs

Shock mount provides over 20 dB isolation from surface vibration noise

Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables

Snap-fit foam windscreen

Mute switch

LED indicator

18" attached XLR preamp

Specifications

Frequency Response	50 to 17,000 Hz
Output Impedance	180 ohms actual (EIA rated at 150 ohms)
*Sensitivity (At 1,000 Hz, open circuit voltage)**	Supercardioid: -33.5 dBV/Pa (21.1 mV) All values -12 dB at 0 gain *1 Pascal = 94 dB SPL
Maximum SPL (1 kHz at 1% THD, 1 kilohm load)	Supercardioid: 122.7 dB All values +6 dB at 0 gain
Equivalent Output Noise (A-weighted)	Supercardioid: 26.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL)	Supercardioid: 67.5 dB
Dynamic Range at 1 kilohm load 96.2 dB	100 dB at 0 gain
Common Mode Rejection	45.0 dB minimum
Preamplifier Output Clipping Level (1% THD)	-6.0 dBV (0.5 V) -12 dBV at 0 gain
Polarity	Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector
Power Requirements	11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements	Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F) Relative Humidity: 0 to 95%