Shure MX412D/N 12' Standard Gooseneck Desktop Microphone (No Cartridge)

Shure MX412D/N Standard Gooseneck Desktop Microphone includes a desktop base with 10' cable, logic functions, programmable switch, LED indicator and snap-fit foam windscreen. Highly adaptable microphone can use a cardioid, supercardioid or omnidirectional polar pattern. Versatile and easily adapted for many uses, including houses of worship, courtrooms and conference centers. Condenser cartridges fit every model in the Microflex product line for enhanced convenience and consistent sound.

Shure MX412D/N 12' Standard Gooseneck Desktop Microphone (No Cartridge)
Usually ships in 1-3 business days
Camcor Item No.	136017424
Mfg. Part No.	MX412D/N

Features

12" Desktop Base with 10' Cable

Snap-Fit Foam Windscreen

Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum

Interchangeable cartridges provide the right polar pattern for every application

Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs

Shock mount provides over 20 dB isolation from surface vibration noise

Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tablesSnap-fit foam windscreen

Programmable on/off switch and LED on/off indicator

New brighter LED improves visibility under strong ambient lighting

Logic input and output terminals for remote control or use with automatic microphone mixers

Specifications

Frequency Response	50 to 17,000 Hz
Output Impedance	180 ohms actual (EIA rated at 150 ohms)
*Sensitivity (At 1,000 Hz, open circuit voltage)**
Maximum SPL (1 kHz at 1% THD, 1 kilohm load)
Equivalent Output Noise (A-weighted)
Signal to Noise Ratio (referenced at 94 dB SPL)
Dynamic Range at 1 kilohm load 96.2 dB	100 dB at 0 gain
Common Mode Rejection	45.0 dB minimum
Preamplifier Output Clipping Level (1% THD)	-6.0 dBV (0.5 V) -12 dBV at 0 gain
Polarity	Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector
Power Requirements	11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements	Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F) Relative Humidity: 0 to 95%