Crestron CLX--2DIM8 8 Channel Dimmer Module, 2 Feeds

Print Crestron CLX--2DIM8 8 Channel Dimmer Module, 2 Feeds pageRequest Bulk Pricing CAMCOR ITEM NO. 267046439 | MFG. PART NO. 6500179
Crestron CLX--2DIM8 8 Channel Dimmer Module, 2 Feeds
Crestron CLX--2DIM8 8 Channel Dimmer Module, 2 Feeds
Zoom
Close WindowZoom
Alternate View
Usually ships in 1-3 business days

Product Highlights
As part of a complete Crestron® lighting system, the CLX-2DIM8 lighting control module provides 8 channels of dimming for incandescent, magnetic low-voltage, neon/cold cathode, and dimmable 2-wire ... More

Is This Item Right For Me? - Ask Our Experts
Phone 800.868.2462
 
WarningCalifornia Residents:
WARNING: Cancer and reproductive harm - See www.P65Warnings.ca.gov for more information.

Product Description

As part of a complete Crestron® lighting system, the CLX-2DIM8 lighting control module provides 8 channels of dimming for incandescent, magnetic low-voltage, neon/cold cathode, and dimmable 2-wire fluorescent loads. The CLX-2DIM8 is actually composed of two independent 4 channel dimmers in a single module. Each channel is rated for 1920 Watts, with a total module rating of 3840 Watts when fed from two separate 20 Amp feeds. Air-gap relays are provided on every channel output allowing individual circuits to be serviced without disabling the entire module.

CLX-Series dimmers are rigorously built using 40 Amp triacs and oversized heat sinks for ultimate reliability. Split-bobbin transformers and ground referenced electronics deliver superior performance. Lamp flicker is minimized through Crestron's innovative zero-crossing detection technique backed by proprietary firmware. Low-maintenance convection cooling assures quiet and trouble-free operation.

An override feature allows each channel to be adjusted to a preset state during setup. In the event that Cresnet® communications should be disrupted for any reason, a simple contact closure can be used to activate the override presets on a global or semi-global basis.

The CLX-2DIM8 occupies a single module space in any CAEN or CAEN-MLO automation enclosure. Termination of high-voltage wiring to the module is facilitated by a CLT-2DIM8 terminal block, sold separately to enable termination of the wiring any time prior to installing the module. CLX modules are controlled by the DIN-AP3 and other 3-Series® control systems via the Cresnet network. A 5-wire link provides bussing of the Cresnet and override signals between modules within an enclosure (interconnect jumpers included).

  • 8 channels of dimming for incandescent, magnetic low-voltage, neon/cold cathode, and dimmable 2-wire fluorescent loads
  • Two independent 4 channel dimmers in a single module
  • Dual or single 120 Volt feed
  • Air-gap relays on every channel output
  • Override preset capability
  • Convection cooled
  • Occupies 1 module space in a CAEN or CAEN-MLO automation enclosure
  • Easy termination using CLT-Series terminal block
  • CEC Title 24 2013 Compliant

Specifications

Load Ratings
Dimmer Channels 8
Per Channel 16 Amps (1920 Watts)
Per Group Channels 1-4: 16 Amps (1920 Watts);
Channels 5-8: 16 Amps (1920 Watts)
Module Total 32 Amps (3840 Watts)
Minimum Load 25 Watts
Load Types Incandescent, Magnetic Low-voltage, Neon/Cold Cathode, Dimmable 2-Wire Fluorescent


Power Requirements

Power Requirements
20 Volts AC, 50/60Hz, single-phase;
All feeds must be same phase or split phase


Connectors on Module
Module Interconnect (2) 5-pin 0.156 inch headers;
Cresnet®/Override interconnect ports;
Connect to DIN-AP3, CAEN-BLOCK, or adjacent CLX-Series module using interconnect cable provided


Connections via CLT Terminal Block
(NOT INCLUDED)

LINE 1 - 2 (2) DIN rail terminal blocks, black,
line power inputs;
Must be same phase or split phase
DIM 1 - 8 (8) DIN rail terminal blocks, red, channel outputs
N IN 1 - 2 (2) DIN rail terminal blocks, white, line input neutrals
N OUT 1 - 8 (8) DIN rail terminal blocks, white, channel output neutrals


Buttons
SETUP                                                            
Used for manual channel activation and TSID


LED Indicators
PWR (green) Indicates line power is applied to the LINE terminal
NET (yellow) Indicates communication with the control system
1 – 8 (red x8) Indicates state of each channel
SETUP (red) Indicates unit is in setup/manual mode


Environmental
Temperature 32° to 104°F (0° to 40°C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 26 BTU/Hr + (4.7 BTU/Hr x Load Current in Amps), 176 BTU/Hr at maximum load


Enclosure
Enclosure Gray metal with black heat sink, surface mount module with (2) integral mounting flanges;
Occupies 1 module space in any CAEN or CAEN-MLO enclosure


Dimensions
Height 7.59 in (19.27 cm)
Width 6.92 in (17.57 cm)
Depth 3.43 in (8.70 cm)


Weight
Weight 4.50 lb (2.04 kg)


Standards & Certifications
Standards & Certifications UL Listed, CEC Title 24 2013 Compliant

Customers Who Bought This Item Also Viewed

Camcor.com

Contents of all material on these pages are ©1999-2019 Camcor, Inc. All Rights Reserved.

hidden item