Home ›  Audio ›  Audio Accessories ›  Crestron

Crestron SAT-70V/100V-4 4 Channel Sonnex Output Transformer

Print Crestron SAT-70V/100V-4 4 Channel Sonnex Output Transformer pageRequest Bulk Pricing CAMCOR ITEM NO. 267046456 | MFG. PART NO. SAT-70V/100V-4
Crestron SAT-70V/100V-4 4 Channel Sonnex Output Transformer
Crestron SAT-70V/100V-4 4 Channel Sonnex Output Transformer
Zoom
Close WindowZoom
Alternate View
Back View
Usually ships in 1-3 business days

Product Highlights
Sonnex® Output Transformers (SAT-70V/100V) are designed for use with the Crestron® Sonnex Multiroom Audio System (SWAMP-24X8) and Expanders (SWAMPE-4 & SWAMPE-8). Available with 2 or 4 channels, ... More

Is This Item Right For Me? - Ask Our Experts
Phone 800.868.2462
 
WarningCalifornia Residents:
WARNING: Cancer and reproductive harm - See www.P65Warnings.ca.gov for more information.

Product Description

Sonnex® Output Transformers (SAT-70V/100V) are designed for use with the Crestron® Sonnex Multiroom Audio System (SWAMP-24X8) and Expanders (SWAMPE-4 & SWAMPE-8). Available with 2 or 4 channels, these accessories enable the conversion of up to four amplifier output channels to handle 70 or 100 Volt speakers. Also known as "constant-voltage", 70 Volt and 100 Volt speaker systems allow for long wire runs using small-gauge wire, with the potential for connecting numerous speakers per circuit (similar to light fixtures on a common electrical circuit). Typical applications include outdoor speaker zones, retail spaces, hallways and common areas.

Sonnex Output Transformers are designed for maximum performance in a minimal space. Each channel handles a 120 Watt speaker load with a wide frequency response of 40 Hz to 20 kHz (±1 dB). Full transformer isolation ensures trouble-free operation for long and complex wire runs, and helps protect the amplifier against electrical disturbances on the speaker line. The 2-channel SAT-70V/100V-2 model can support a single stereo zone, or two mono zones, of either 70V or 100V speakers. The 4-channel SAT-70V/100V-4 supports two stereo zones, four mono zones, or a combination on one stereo zone and two mono zones.

  • Allows the use of 70 or 100 Volt speakers with any Sonnex® system
  • Enables the connection of multiple speakers to a single amplifier output
  • Enables the use of small gauge wire for long runs
  • Provides full transformer isolation
  • Rated 120 Watts at 70 or 100 Volts per channel
  • 40 Hz to 20 kHz (±1 dB) frequency response
  • 2 and 4 channel models available
  • Single-space rack mountable

Specifications

Audio
Input Power Rating 120 Watts RMS at 8 Ohms per channel
Output Power Rating 120 Watts at 70 or 100 Volts (Transformer isolated) per channel
Frequency Response 40 Hz to 20 kHz ±1 dB


Connectors
CH 1 – 4, IN (2 or 4) 2-pin 7.62mm 15A detachable terminal blocks;
8 Ohm speaker level inputs;
Wire Size: Terminals accept up to 14 AWG
CH 1 – 4, OUT (2 or 4) 3-pin 5mm detachable terminal blocks;
70V or 100V speaker level outputs;
Minimum Load Impedance: 41 Ohms @ 70V, 83 Ohms @ 100V;
Wire Size: Terminals accept up to 14 AWG
G                                                            
6-32 screw, chassis ground lug


Environmental
Temperature 41° to 113°F (5° to 45°C)
Humidity 10% to 90% RH (non-condensing)


Enclosure
Chassis Metal with black finish, vented sides
Front Panel Metal, black finish with polycarbonate label overlay
Mounting Freestanding or 1U 19-inch rack-mountable (adhesive feet and rack ears included)


Dimensions / Weight

Height 1.72 in (44 mm) without feet
Width 19.00 in (483 mm);
17.28 in (439 mm) without rack ears
Depth 10.01 in (255 mm)
Weight 12.0 lb (5.45 kg)

Customers Who Bought This Item Also Viewed

Camcor.com

Contents of all material on these pages are ©1999-2019 Camcor, Inc. All Rights Reserved.

hidden item