Features two 14â€D pull out shelves and adjustable top shelf for heights of 34", 38" and 42". Black powder paint. Three open shelves, shelf size: 24"W x 18"D; Middle to bottom shelf: 15-1/2". "E" models include 6-outlet power strip. Adjustable Table has three (3) 20-gauge steel 18" x 24" shelves. Each shelf is press formed with a 1?4" lip bordering the top surface on all four sides to prevent equipment from sliding off. The top shelf has a 20-gauge steel stiffener electrically welded underneath the surface front to back. A Black rubber 18" x 24" mat is placed on the top shelf. A 14" X 20" pull out notebook shelf pulls out from under the top shelf on 14" glides. The pull out shelf is mounted to two steel bars that are arc welded between the leg posts on the upper portion of the cart and safely supports equipment up to 15 lbs. The top and middle shelves have two (2) 3?16" diameter holes centered on both the right side and the left side to accept an optional electrical assembly. The table has an adjustable top section that consists of one (1) 20-gauge 18" x 24" shelf with four (4) 14-gauge steel legs 21-1?4" long welded to the shelf at each corner. Each offset leg has two (2) 1?4" diameter holes near the bottom of the section and in the center of the leg that will accept a 1?4-20 machine screw. The holes are spaced 4" apart to permit height adjustments of 26", 30", 34", 38" and 42" when matched to the bottom section of the table. Each offset leg fits over the bottom section of the table and is secured at the desired height by a machine screw. The bottom section of the adjustable table consists of two (2) 20-gauge steel 18" x 24" shelves - one at the top of the section and the other at the bottom. There are four (4) 14- gauge steel 19" legs welded to the shelves at each corner. Each 19" leg has four (4) 1?4" diameter holes down the center of the leg that will accept a 1?4-20 machine screw. Holes are 4" apart to permit table height adjustments (as noted above). Model has a black powder paint finish. A hard plastic caster insert is mounted to each leg. Casters are mar- resistant Black hard rubber and 4" in diameter.
- Incorporates your laptop, data projector, DVD player, scanner and more all on one compact presentation cart
- Features a 5-height capability, from 26-42"h in 4" increments and is easily adjusted by resetting four leg screws
- Large 14d notebook shelf pulls out on smooth rolling glides and allows you to easily integrate your notebook computer with projectors and other equipment
- Notebook shelf supports are arc welded to the leg supports for a strong and secure platform to support expensive computer equipment
- Durable all-steel construction with black powder paint finish feature legs welded to the shelves so minimal assembly time is required
- Rolls smoothly on 4" Quiet Glide casters, 2 locking
- Die-pressed shelves have a 1/4" lip to prevent equipment from accidentally sliding off while in transport
- Top shelf includes a ribbed rubber mat
- Recommended for use with a projector and notebook computer or up to a 20" diagonal monitor
- New and improved 6-outlet electrical unit available with built-in cord winder and 20' extension cord
- Electrical units are standard on A2642NS E and M models
- A2642NS series carts feature a steel content with 25% to 35% post-consumer recycled steel and are recyclable at the end of the product life cycle
- A2642NS series carts also comply with the GREENGUARD Environmental Institutes GREENGUARD Children & Schools Indoor Air Quality standards contributing to points toward Leadership in Energy and Environmental Design (LEED) Certification
All material ©2018 Camcor,
Inc. All Rights Reserved.
