60W 2U Power Amplifier

The P-906MK2 power amplifier delivers up to 60W of power respectively at less than 0.5% total harmonic distortion (THD) from 20 to 20,000Hz (transformerless 4-ohm output). The power amplifier have a high-impedance direct input and an input port (edge connector) to accept one plug-in module. Module selection is determined by application among the TOA plug-in modules.

The power amplifiers have a low-cut switch for a cutoff frequency of 60 Hz, and an input-level switch for input sensitivity of 1V (0 dBV) or 100mV (-20 dBV). Output terminals provide connections for 4-ohm and 8-ohm speakers, plus 25-volt and 70-volt speaker distribution outlets. With plug-in modules, the power amplifiers may be used as a PA amplifier.

The power amplifiers can be rack mounted by using optional rack mounting bracket MB-25B (P-906MK2). The optional perforated panel PF-511 provides suitable ventilation, finished in color to match the power amplifiers.

• 20 to 20,000Hz ±1dB wide frequency response
• Low distortion and noise level
• Excellent output regulation
• Full range of plug-in modules
• Self-protecting circuitry design
• Varied output impedance - 4 ohms, 8 ohms, 25 and 70 volts
• Input level switch (selectable 1000mV/100mV)
• Portable or rack mounting type