Kingston 16GB (1x16GB) DDR5 6000MT/s CL30 FURY Beast Black XMP at Camcor.com

Kingston 16GB (1x16GB) DDR5 6000MT/s CL30 FURY Beast Black XMP
In Stock
Camcor Item No.	583009715
Mfg. Part No.	KF560C30BB-16

Kingston FURY KF560C30BB-16 is a 2G x 64-bit (16GB) DDR5-6000 CL30 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 2G x 8-bit FBGA components per module. The module supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Each module has been tested to run at DDR5-6000 at a low latency timing of 30-36-36 at 1.4V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows

FACTORY TIMING PARAMETERS

Default (JEDEC): DDR5-4800 CL40-39-39 @1.1V
XMP Profile #1: DDR5-6000 CL30-36-36 @1.4V
XMP Profile #2: DDR5-5600 CL40-40-40 @1.25V
XMP Profile #3: DDR5-4800 CL38-38-38 @1.1V

FEATURES

Power Supply: VDD = 1.1V Typical
VDDQ = 1.1V Typical
VPP = 1.8V Typical
VDDSPD = 1.8V to 2.0V
On-Die ECC
Height 1.37" (34.9mm), w/heatsink

Specifications

General Information
Manufacturer	Kingston Technology Company
Brand Name	Kingston
Product Line	FURY Beast
Product Type	RAM Module
Technical Information
Memory Size	16 GB
Memory Technology	DDR5 SDRAM
Memory Voltage	1.40 V
Number of Modules	1 x 16GB
Memory Speed	6000 MHz
Memory Standard	DDR5-6000/PC5-48000
Memory Rank	Single-rank
Error Checking	Non-ECC
Signal Processing	Unbuffered
CAS Latency	CL30
Physical Characteristics
Number of Pins	288-pin
Form Factor	DIMM
Thickness	260.6 mil
Width	1.4"
Length	5.3"
Miscellaneous
Environmentally Friendly	Yes
Environmental Certification	Hazard Assessment of Perfluorooctane Sulfonate (PFOS)
Environmental Compliance	Restriction of Hazardous Substances (RoHS) Waste Electrical and Electronic Equipment Directive (WEEE) Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
Warranty
Limited Warranty	Lifetime