Kingston 32GB (2x16GB) DDR5 6800MT/s CL34 FURY Beast Black RGB EXPO at Camcor.com

Kingston 32GB (2x16GB) DDR5 6800MT/s CL34 FURY Beast Black RGB EXPO
Usually ships in 1-3 business days
Camcor Item No.	583009791
Mfg. Part No.	KF568C34BBEAK2-32

Kingston FURY KF568C34BBEAK2-32 is a kit of two 2G x 64-bit (16GB) DDR5-6800 CL34 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 2G x 8-bit FBGA components per module. Each module kit supports AMD® EXPO v1.1 and Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 32GB. Each module has been tested to run at DDR5-6800 at a low latency timing of 34-45-45 at 1.4V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:

FACTORY TIMING PARAMETERS

Default (JEDEC): DDR5-4800 CL40-39-39 @1.1V
EXPO Profile #0: DDR5-6800 CL34-45-45 @1.4V
EXPO Profile #1: DDR5-6400 CL32-39-39 @1.4V
XMP Profile #1: DDR5-6800 CL34-45-45 @1.4V
XMP Profile #2: DDR5-6400 CL32-39-39 @1.4V

FEATURES

Power Supply: VDD = 1.1V Typical
VDDQ = 1.1V Typical
VPP = 1.8V Typical
VDDSPD = 1.8V to 2.0V
On-Die ECC
Height 1.66" (42.23mm), w/heatsink

Specifications

General Information
Manufacturer	Kingston Technology Company
Brand Name	Kingston
Product Line	FURY Beast
Product Type	RAM Module
Technical Information
Memory Size	32 GB
Memory Technology	DDR5 SDRAM
Memory Voltage	1.40 V
Number of Modules	2 x 16GB
Memory Speed	6800 MHz
Memory Standard	DDR5-6800/PC5-54400
Memory Rank	Single-rank
Error Checking	Non-ECC
Signal Processing	Unbuffered
CAS Latency	CL34
RGB	Yes
Physical Characteristics
Number of Pins	288-pin
Form Factor	DIMM
Thickness	279.9 mil
Width	1.7"
Length	5.3"