The Sceptre S8 two-way monitor combines an 8-inch low/mid-frequency driver and a 1-inch (25 mm), horn-loaded, high-frequency transducer into a single coaxial unit with aligned voice coils. Its advanced coaxial design, based on Fulcrum Acoustic’s TQ™ Temporal Equalization, works integrally with a 32-bit, 96 kHz, dual-core processor to deliver clarity and coherence that has previously only been available in ultra-high-end systems. Add 180 watt, Class D biamplification; acoustic ports; a rich set of acoustic adjustments; and full speaker protection; and you have a new, affordable monitoring standard.
- 180W RMS, Class D biamplification with internal heat sink
- RF shielding, current-output limiting and over-temperature protection
- Balanced XLR and 1/4-inch TRS line-level inputs with A-taper level control
- Amplifier soft start feature eliminates popping on power-up
- 102dB maximum continuous SPL
- Internal power supply with IEC connector
- Power switch with on/off LED
Specifications
Specifications
| Impedance | 10000 ohm |
| Maximum Frequency Response (Bandwidth) | 0.0600 kHz |
| Maximum Frequency Response (Bandwidth) | 60 Hz |
| Minimum Frequency Response (Bandwidth) | 0.0500 kHz |
| Minimum Frequency Response (Bandwidth) | 50 Hz |
| Acoustic space | flat, -1.5, -3 and -6 dB |
| Crossover Frequency | 2.2 kHz |
| HF Amplifier Power | 90 W |
| HF control | flat, +1, -1.5 and -4 dB |
| HF driver | 1 inch |
| LF Amplifier POwer | 90 W |
| LF Driver | 8 inch |
| Low Cut | flat, 60, 80 and 100 Hz |
| Peak SPL at 1meter | 116 dB |
Product Dimensions
| Depth | 11.8 in |
| Height | 15.75 in |
| Product Weight | 24.25 lbs |
| Width | 11.4 in |
|
All material ©2025 Camcor,
Inc. All Rights Reserved.
