Tripp Lite by Eaton SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS, 1U Rack/Vertical, WEBCARDLX Network Interface, USB, DB9, 6 Outlets at Camcor.com

Tripp Lite by Eaton SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS, 1U Rack/Vertical, WEBCARDLX Network Interface, USB, DB9, 6 Outlets
In Stock
Camcor Item No.	224008319
Mfg. Part No.	SMART1000RM1UN

Protects Mission-Critical Rack-Mounted Equipment

Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
Audible alarm signals loss of utility power, overload and low battery
6 NEMA 5-15R outlets
10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
450-joule surge suppression rating

Reliable Battery Backup

Pre-Installed WEBCARDLX Network Interface

Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, Telnet, SSH, and CLI.
Optional E2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status

Reduce Service Calls with Auto Probe Autonomous Device Management

Auto Probe feature (Firmware 15.5.2 and greater) of the LX Platform Interface checks the connectivity status of any networked device and automatically takes one or more user-configured actions if the device fails to respond; actions include outlet reboot, set SNMP traps, SNMP OID sets, and even script execution when used in conjunction with the Tripp Lite PowerAlert Network Shutdown Agent (PANSA)

Switchable Outlets

2 load banks, each with one outlet controllable remotely to reboot equipment or shed nonessential loads

Automatic Voltage Regulation (AVR)

Maintains 120V nominal output over input range of 83V-147V without using battery power

EMI/RFI Line Noise Filtering

Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance

LED Indicators

Front-panel LEDs signal power, voltage correction, load level and battery charge state

Communications Ports

USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software (available via free download at www.tripplite.com/poweralert)
EPO port supports emergency shutdown in large facilities

Versatile Installation Options

Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack
Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations
Compatible with vertical mount cabinets

General Information
Manufacturer	Tripp Lite by Eaton
Brand Name	Tripp Lite by Eaton
Product Line	SmartPro
Product Model	SMART1000RM1UN
Product Type	Line-interactive UPS
Technical Information
Receptacle Type	NEMA 5-15R
Receptacle Detail	6 x NEMA 5-15R
Power Description
Load Capacity (VA)	1000 VA
Load Capacity (Watt)	800 W
Input Voltage	120 V AC
Output Voltage	120 V AC
Battery Information
Backup/Run Time (Full Load)	4 Minute
Physical Characteristics
Height	1.7"
Width	17.5"
Depth	16.8"
Rack Height	1U
Form Factor	Rack-mountable
Weight (Approximate)	32 lb
Miscellaneous
Package Contents	SmartPro SMART1000RM1UN 1kVA Rack-mountable Mounting Hardware Cabling for USB & DB9 Monitoring and EPO Switching PowerAlert Unattended Shutdown and UPS/Power Monitoring Software Instruction Manual
Country of Origin	China
TAA Compliant	Yes
Environmentally Friendly	Yes
Environmental Compliance	Restriction of Hazardous Substances (RoHS)
Warranty
Limited Warranty	3 Year