Design of P2S
Bambu Lab's P2S embodies a "Function Over Form" philosophy. Its minimalist design conceals meticulous engineering, with every detail fine-tuned to deliver a quality that is truly distinct. This isn't just a printer; it's a testament to how purposeful design can elevate the entire creative experience.
P2S Quality Prints
The P2S embodies Bambu Lab's high standard of print quality. We have meticulously fine-tuned its performance across all print types, ensuring superior detail preservation, sharp edges, and flawless surfaces to meet our customers' high expectations.
The User Experience As Good As A Smartphone.
The P2S features a fully upgraded touchscreen and a powerful processor, running our new intuitive second-generation UI. Enjoy smoother interactions, richer graphics, and clearer step-by-step instructions.
5-inch Touch Screen | 2nd-Gen UI
Bambu Lab P2S - Technical Specifications
Printing Technology
Fused Deposition Modeling
Body
Build Volume (W*D*H) 256mm*256mm*256mm
Chassis Plastic and Steel
Outer Frame Plastic and Glass
Physical Dimensions
Physical Dimensions 392mm*406mm*478mm
Net Weight 14.9 kg
Toolhead
Extruder Gear Hardened Steel
Nozzle Hardened Steel
Max Nozzle Temperature 300 ℃
Included Nozzle Diameter 0.4 mm
Supported Nozzle Diameter 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
Filament Cutter Built-in
Filament Diameter 1.75 mm
Extruder Motor Bambu Lab High-precision Permanent Magnet Synchronous Motor
Heatbed
Build Plate Material Flexible Steel Plate
Included Build Plate Type Textured PEI Plate
Supported Build Plate Type Textured PEI plate, Smooth PEI Plate, Cool Plate SuperTack
Max Heatbed Temperature 110 ℃
Speed
Max Speed of Toolhead 600 mm/s
Max Acceleration of Toolhead 20,000 mm/s
Max Flow for Hotend 40 mm/s
(Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 ℃ printing temperature)
Filtration
Filter Type Activated Carbon
VOC Filtration Supported
Particulate Matter Filtration Supported
Cooling
Part Cooling Fan Closed Loop Control
Cooling Fan for Hotend Closed Loop Control
Auxiliary Part Cooling Fan Closed Loop Control
Filament Supported
PLA, PETG, ABS, ASA, TPU, Support for PLA, Support for PLA/PETG, Support for ABS, PET, PA, PC, PVA, PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF
Sensor
Camera Built-in; 1920*1080; 30 fps HD
Door Sensor Supported
Filament Run Out Sensor Supported
Filament Tangle Sensor Supported
Filament Odometry Supported with AMS
Power Loss Recovery Supported
Electrical Requirements
Voltage 100-120 VAC / 200-240 VAC, 50/60 Hz
Max Power* 1200 W@220 V / 1000 W@110 V
PLA Steady-State Power 200 W@220 V / 200 W@110 V（PLA printing）
Working Temperature
10 ?C?30 ?C
Electronics
Touchscreen 5-inch 854*480 Touchscreen
Storage Built-in 8 GB EMMC and USB Port
Control Interface Touchscreen, mobile App, PC App
Motion Controller Dual-core Cortex-M4 and Single-core Cortex-M7
Application Processor Quad-core 1.5 GHz ARM A7
Neural Processing Unit 2 TOPS
Software
Slicer Bambu Studio
Supports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported.
Supported Operating System MacOS, Windows, Linux
Network Control
Ethernet Not Available
Wireless Network Dual-Band Wi-Fi
Network Kill Switch Not Available
Removable Network Module Not Available
802.1X Network Access Control Not Available
Wi-Fi
Operating Frequency 2412 - 2472 MHz, 5150 - 5850 MHz (FCC/CE)
2400 - 2483.5 MHz, 5150 - 5850 MHz (SRRC)
Wi-Fi Transmitter Power (EIRP) 2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC)
5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC)
5 GHz Band3: <30 dBm (CE); <24 dBm (FCC)
5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE)
Wi-Fi Protocol IEEE 802.11 a/b/g/n
* To ensure the heatbed quickly reaches the needed temperature (35-110℃), the printer will maintain maximum power for about 3-5 minutes.
