48U 600mm W x 1060mm D NetShelter SV Enclosure with Sides, Black

The vertical mounting rails can be adjusted in 0.4 in (10 mm) increments covering virtually any mounting requirement for IT equipment. Align the mounting rails with the opposite side of the enclosure by identifying the hole position used. U positions are numbered front and back for rapid installation of equipment. Enclosures include pre-installed joining hardware for joining enclosures in a row and provide additional stability to the enclosure. Enclosures are pre-installed with joining brackets for joining enclosures on 600-mm centers. Joining brackets for joining enclosures on 24-in centers are included with the provided hardware kit. Split rear doors improve access and serviceability to rear of rack mounted equipment. The split rear doors help to maximize floor space. Only 11 inches (279 mm) of clearance is required behind the enclosures to allow for door swing. Integrated and adjustable rear accessory mounting brackets provide zero U mounting locations for tool-less accessories. Each bracket has two mounting bays to support a combination of up to four accessories such as Rack PDUs and vertical cable organizers mounted inside the rack. Adjust the brackets from their standard factory positions or install additional brackets (AR824002 - Qty 2) to install half enclosure height accessories such as cable managers and vertical Rack PDUs.

• Adjustable mounting rails with simple alignment
• Split rear doors
• Joining hardware provided
• Pre-installed rear accessory mounting brackets
• Standard-profile castors and adjustable leveling feet from underneath
• Enclosure adjustment tools and hardware provided
• Cable access openings and panels
• Quick release doors with spring pin design
• Removable full-height side panels
• Perforated front and rear doors