Tripp Lite PowerVerter APS X APSX750 Power Inverter/Charger
CAMCOR ITEM NO. 323900861 | MFG. PART NO. APSX750
Product Highlights
Tripp Lite's APSX750 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. ... More
Is This Item Right For Me? - Ask Our Experts
California Residents:
WARNING: Cancer and reproductive harm - See www.P65Warnings.ca.gov for more information.
Tripp Lite's APSX750 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 750 watts of continuous 230V AC power to 2 AC outlets from any 12V battery or automotive DC source. OverPower inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes and DoubleBoost inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3-stage, selectable 5/20 amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design, with frequency control powers resistive electronic loads or
Front Panel LEDs: Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported)
Power Description
Input Voltage
12 V DC
230 V AC
Input Voltage Range
10 to 15 V DC
Output Voltage
230 V AC ±5% Nominal
12 V DC Nominal
Frequency
50 Hz ±0.3Hz
Input Current
72 A @ 12 V DC
6.20 A @ 230 V AC
Load Capacity
750 W Continuous Power / 1.50 kW Peak Power
Waveform Type
Pulse-width Modulated Sine Wave
Switching Time
6 ms
Environmental Conditions
Temperature
32°F (0°C) to 104°F (40°C) Operating
Humidity
0% to 95% Non-condensing Relative Humidity Operating
Physical Characteristics
Color
Black
Power Cord/Cable
72" Input
Dimensions
9" Height x 8.75" Width x 9" Depth
Weight (Approximate)
18.60 lb
Miscellaneous
Additional Information
Frequency control for operating stability
RJ45 port allows connection of APS/PowerVerter Remote Switch
Switch allows user to select between off, auto-invert and charge-only settings
Advanced 20 amp, 3-stage battery charger and selector switch for gel or wet cell batteries
Configuration switches to allow the user to select the low voltage for the unit to automatically transfer from AC power to battery backup
Low voltage transfer to battery power: User configurable to 144V, 163V, 182V & 201V Overload protection: Includes 3A input breaker dedicated to the charging system and 4A output breaker for AC output loads
DC Input Voltage: 12 VDC
AC Input Voltage: 230 VAC
DC Charger Output Voltage: 12 VDC
AC Output Voltage: 230 VAC
AC Plug Type: IEC-320 C14
DC Plug Type: Set of 2 DC bolt-down terminals
Outlet/Receptacle Type: IEC-320 C13
Package Contents
PowerVerter APS X APSX750 Power Inverter/Charger
APSX750 Inverter/Charger
Instruction manual with warranty information
Compatibility
Compatible with marine, automotive, telecom, computer, emergency and a variety of other applications