24P VIDEO TRIPOD KIT

A complete video tripod kit that can support up to 11 lbs with a height range of 29 1/2" to 71 1/2"

The ProMaster 24P Video Tripod Kit supports a camera and accessories up to 11 lbs. Its sliding quick release plate and 75mm bowl allow you to balance and level your rig properly for professional-looking results.

The head features independent pan and tilt locks to isolate movement. A drag control for the tilt aids in managing the speed (resistance) of that motion. Two handles are provided. You can use your right or left hand to move the camera while the other is free to operate its controls. Two threaded ports are located on the head (1/4"-20 and 3/8"-16) to connect accessories. These will move with your camera and remain pointed at your subject, which is particularly important for lights and microphones.

Using a twin-tube design for the legs makes them very stable. The adjustable mid-level spreader builds upon this strength and lets the angle of each leg be adjusted independently. Laser-etched lines are found in the upper and middle leg sections. These aid in setting each leg's length with consistency. The feet feature soft platforms connected to ball sockets. Each foot can self-adjust to sit flat on the ground regardless of the leg angle. A spike, for outdoor use, is integrated into each foot.

The 24P kit has a height range of 29 1/2" to 71 1/2" and collapses to 33 1/2" for transport and storage. A soft storage case is included.

Key Features:

Sliding quick release plate

Tilt drag control

Independent tilt and pan locks

75mm leveling bowl

Two control handles

Two accessory attachment ports

Etched lines on legs aid in height adjustment

Adjustable mid-level spreader

Independently adjustable leg angles

Retractable spiked feet