Product Description
Purge Saving Multi-Color Printing
Painting intricate models is a thing of the past --- the H2C brings your designs to life with six-color printing and a versatile seventh nozzle for support or an additional color.
Purge Saving Multi-Material Printing
With the H2C, you can print up to seven different materials in a single run --- no nozzle purging required. Combine multiple material properties in one seamless structure and take integrated design to a whole new level.
Bambu Lab H2C - Technical Specifications
Printing Technology
Fused Deposition Modeling
Body
Build Volume (W*D*H) Single Nozzle Printing: 325mm*320mm*320mm (Left)
Single Nozzle Printing: 305mm*320mm*325mm (Right)
Dual Nozzle Printing: 300mm*320mm*320mm
Total Volume for Two Nozzles: 330mm*320mm*320mm
Chassis Aluminum and Steel
Outer Frame Plastic and Glass
Physical Dimensions
Physical Dimensions 492mm*514mm*626mm
Net Weight 32.5 kg
Toolhead
Extruder Gear Hardened Steel
Nozzle Hardened Steel
Max Nozzle Temperature 350 degreesC
Supported Nozzle Diameter 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
Filament Cutter Built-in
Filament Diameter 1.75 mm
Extruder Motor Bambu Lab High-precision Permanent Magnet Synchronous Motor
Heatbed
Build Plate Material Flexible Steel Plate
Included Build Plate Type Textured PEI Plate
Supported Build Plate Type Textured PEI plate, Engineering Plate
Max Heatbed Temperature 120 degreesC
Speed
Max Speed of Toolhead 1000 mm/s
Max Acceleration of Toolhead 20,000 mm/s
Max Flow for Hotend 40 mm/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 degreesC printing temperature)
Chamber Temperature Control
Active Chamber Heating Supported
Max Temperature 65 degreesC
Air Purification
Pre-filter Grade G3
HEPA Filter Grade H12
Activated Carbon Filter Type Granulated Coconut Shell
VOC Filtration Superior
Particulate Matter Filtration Supported
Cooling
Part Cooling Fan Closed Loop Control
Cooling Fan for Hotend Closed Loop Control
Main Control Board Fan Closed Loop Control
Chamber Exhaust Fan Closed Loop Control
Chamber Heat Circulation Fan Closed Loop Control
Auxiliary Part Cooling Fan Closed Loop Control
Toolhead Enhanced Cooling Fan Closed Loop Control
Supported Filament Type
PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS;Carbon/Glass Fiber Reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA, PPS
Sensor
Live View Camera Built-in; 1920*1080
Nozzle Camera Built-in; 1920*1080
BirdsEye Camera Built-in; 3264*2448 (Equipped with Laser Edition)
Toolhead Camera Built-in; 1600*1200
Door Sensor Supported
Filament Run Out Sensor Supported
Filament Tangle Sensor Supported
Filament Odometry Supported with AMS
Power Loss Recovery Supported
Electrical Requirements
Voltage 100-120 VAC / 200-240 VAC, 50/60 Hz
Max Power* 1800 W@220 V/1250 W@110 V
Typical Power 200 W@220 V/200 W@110 V (Single Nozzle Printing PLA)
Working Temperature
10 degreesC-30 degreesC
Electronics
Touchscreen 5-inch 720*1280 Touchscreen
Storage Built-in 8 GB EMMC and USB Port
Control Interface Touchscreen, mobile App, PC App
Motion Controller Dual-core Cortex-M4 and Single-core Cortex-M7
Application Processor Quad-core ARM with NPU
Software
Slicer Bambu StudioSupports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported.
Supported Operating System MacOS, Windows, Linux
Network Control
Ethernet Not Available
Wireless Network Wi-Fi
Network Kill Switch Not Available
Removable Network Module Not Available
802.1X Network Access Control Not Available
Wi-Fi
Operating Frequency 2412 - 2472 MHz, 5150 - 5850 MHz (FCC/CE)2400 - 2483.5 MHz, 5150 - 5850 MHz (SRRC)
Wi-Fi Transmitter Power (EIRP) 2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC)5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC)5 GHz Band3: <30 dBm (CE); <24 dBm (FCC)5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE)
Wi-Fi Protocol IEEE 802.11 a/b/g/n
Important notice
The AMS requires specific accessory configurations for various Bambu Lab 3D printers.
CAMCOR ITEM NO. 571100004 | MFG. PART NO. PF003-C+SA007-US
California Residents:
