The most versatile screen surface and the premier choice when ambient light is controllable. It evenly distributes light over a wide viewing area while colors remain bright and life-like, with no ... More
Is This Item Right For Me? - Ask Our Experts
WARNING: Cancer and reproductive harm - See www.P65Warnings.ca.gov for more information.
The most versatile screen surface and the premier choice when ambient light is controllable. It evenly distributes light over a wide viewing area while colors remain bright and life-like, with no shifts in hue. Screen surface can be cleaned with mild soap and water. Flame retardant and mildew resistant.
Ideal for applications where a recessed installation is not desired or feasible.
Patented in-the-roller motor mounting system for quiet operation.
Handsome white enamel case blends with any decor.
Matte White fabric up to 10' high will be seamless.
Glass Beaded fabric up to 8' will be seamless.
Video Spectra 1.5 and High Contrast Matte White fabric available in sizes up to 8' high.
High Power fabric is available in sizes up to 9'x12' and will be seamless in sizes up to 6' high.
Optional floating mounting bracket allows screen to be mounted onto a wall or ceiling studs and aligned left or right after installation by releasing two sets of screws.
electrically operated 120 volt (60 Hz) 1.4 amp.
Shall have specially designed motor mounted inside the roller with a patented noise silencer to be three wire quick reversal type, oiled for life, with automatic thermal overload cut-out, integral gears, capacitor and an electric brake to prevent coasting.
To have pre-set but adjustable limit switches to automatically stop picture surface in the "up" and "down" positions.
The roller to be of rigid metal, 3" in diameter.
Screen fabric to be flame retardant and mildew resistant fiberglass with Glass Beaded, Matte White, High Contrast Matte White, Video Spectra® 1.5 or High Power picture surface with black masking borders standard.
Bottom of fabric shall be formed into a pocket holding a 3/8" diameter metal rod.
Case to be 22-gauge steel, hexagon in shape with flat back to prevent scraping fabric.
Case end caps to be heavy duty, allowing no exposed roller pins.
End caps shall form sturdy brackets for wall or ceiling installation.
To be complete with three position control switch with cover plate.
Screen to be listed by Underwriters' Laboratories and CSA. Matte White: Horizontal seams required when both dimensions exceed 10 feet.
Glass Beaded: Horizontal seams required when both dimensions exceed 8 feet.
Video Spectra 1.5 and High Contrast Matte White: Available in sizes where both dimensions do not exceed 8 feet.
High Power: Available in sizes up to and including 9 feet by 12 feet.
Horizontal seams required when both dimensions exceed 6 feet.
DETAIL DIMENSIONAL DRAWINGS, WIRING DIAGRAMS AND INSTALLATION INSTRUCTIONS AVAILABLE UPON REQUEST.
Black "Extra Drop" to lower picture area more than normal. Maximum total drop 13' (396 cm) including picture area. White "Extra Drop" to lower picture area more than normal. Maximum total drop 13' (396 cm) including picture area. Floating Mounting Bracket which allows the screen to be mounted either on the wall or ceiling at most secure position. The screen can be moved left or right for proper centering on the wall or alignment to projector. Available in either black or white. Single Motor Low Voltage Control, 3 Button with 1 Switch Radio Frequency Wireless Remote Control for LVC System Infrared Wireless Remote Control for LVC System Locking Switch Coverplate for 120 V or 3 Button LVC Switch. Key Operated Switch for 120 V only (note: cannot be used with low voltage system). No borders (black masking borders standard). 220 Volt (50 Hz) Motor. Video Projector Interface - 12 V or 5 V. No. 6, 6# Non-adjustable Extension Brackets SCB-100 - RS-232 Serial Control Board NET-100 Ethernet-Serial Adapter (must be used with SCB-100)