Home ›  Audio ›  Microphones Wired ›  AKG

Reference Dynamic Vocal Microphone, Precision Metal Dust Filter

Print Reference Dynamic Vocal Microphone, Precision Metal Dust Filter pageRequest Bulk Pricing CAMCOR ITEM NO. 108009164 | MFG. PART NO. D7
Reference Dynamic Vocal Microphone, Precision Metal Dust Filter
Reference Dynamic Vocal Microphone, Precision Metal Dust Filter
Zoom
Close WindowZoom
Alternate View

MSRP: 274.91
Savings: $55.91

Your Price: $219.00
Quantity

Product Highlights
The AKG D 7 is a supercardioid dynamic microphone. It has been designed specifically as a vocal microphone for rough onstage use. The wide frequency response of the D 7 slightly favors the ... More

Is This Item Right For Me? - Ask Our Experts
Phone 800.868.2462
 
WarningCalifornia Residents:
WARNING: Cancer and reproductive harm - See www.P65Warnings.ca.gov for more information.

Product Description

The AKG D 7 is a supercardioid dynamic microphone. It has been designed specifically as a vocal microphone for rough onstage use. The wide frequency response of the D 7 slightly favors the midfrequency and treble regions to ensures good intelligibility of speech. The term "supercardioid polar response" means that the D 7 is most sensitive to sound arriving from in front of it, less sensitive to sound arriving from the sides and rear. This pickup pattern is virtually the same for all frequencies or, in other words, from the lowest to the highest notes ("frequency independent").
A mechanical/pneumatic shock mount on the transducer element minimizes handling and cable noise. An integrated windscreen reduces pop, wind, and breath noise to a minimum. A built-in humbucking coil and 80-Hz high pass filter will effectively suppress any other kind of unwanted low-frequency noise. The filter is permanently active. Therefore, the microphone has no separate on/off switch for the highpass filter. A rugged front grill made of spring-steel wire mesh that is extremely resistant to deformation and a sturdy zinc alloy die-cast body effectively protect the microphone and transducer element from damage on stage and on the road.

  • Designed specifically as a vocal microphone for rough onstage use
  • Wide frequency response of the D 7 slightly favors the midfrequency and treble regions to ensures good intelligibility of speech
  • Pickup pattern is virtually the same for all frequencies or, in other words, from the lowest to the highest notes ("frequency independent")
  • Mechanical/pneumatic shock mount on the transducer element minimizes handling and cable noise
  • Integrated windscreen reduces pop, wind, and breath noise to a minimum
  • Built-in humbucking coil and 80-Hz high pass filter will effectively suppress any other kind of unwanted low-frequency noise

Specifications

Specifications

Impedance600 ohm
Maximum Frequency Response (Bandwidth)20.0000 kHz
Maximum Frequency Response (Bandwidth)20000 Hz
Maximum SPL (Sound Pressure Level)156 dB
Minimum Frequency Response (Bandwidth)0.0700 kHz
Minimum Frequency Response (Bandwidth)70 Hz
Sensitivity-52 dBV
Signal to Noise Ratio76 dB

Product Dimensions

Depth11.2 in
Height4 in
Product Weight2.83 lbs
Width7.2 in

Customers Who Bought This Item Also Viewed

Camcor.com

Contents of all material on these pages are ©2023 Camcor, Inc. All Rights Reserved.