Shure Wh20XLR Dynamic Headset Microphones w/ Cable and Belt Clip

Print Shure Wh20XLR Dynamic Headset Microphones w/ Cable and Belt Clip pageRequest Bulk Pricing CAMCOR ITEM NO. 136017367 | MFG. PART NO. WH20XLR
Shure Wh20XLR Dynamic Headset Microphones w/ Cable and Belt Clip
Shure Wh20XLR Dynamic Headset Microphones w/ Cable and Belt Clip
Zoom
Close WindowZoom
Alternate View

MSRP: 95.00
Savings: $15.00

Your Price: $80.00
Quantity

Free ShippingFREE
SHIPPING (?)

This item has Free Shipping!

Camcor, Inc. uses parcel carriers including UPS and FedEx. UPS will NOT deliver to PO Boxes (can only be shipped via US Postal Service). For residential and business orders shipped by motor freight (truck) common carrier, normal delivery is curbside or loading dock (Dock to Dock Delivery) and NOT inside the home or business.

For any special request such as "in home", "inside building", "up elevators", "up stairs", "set up", "lift gate truck", the freight company will assess additional charges. Customers are responsible for any such charges.

Product Highlights
Shure WH20XLR is a rugged, lightweight, dynamic headset microphone that provides high-quality voice pickup. It fits securely for active microphone users, such as aerobics instructors and musicians, ... More

Is This Item Right For Me? - Ask Our Experts
Phone 800.868.2462
 
WarningCalifornia Residents:
WARNING: Cancer and reproductive harm - See www.P65Warnings.ca.gov for more information.

Product Description

Shure WH20XLR is a rugged, lightweight, dynamic headset microphone that provides high-quality voice pickup. It fits securely for active microphone users, such as aerobics instructors and musicians, with low visibility for stage appearances.

The cardioid (unidirectional) pickup pattern provides greater gain-before-feedback and isolation from ambient noise and other unwanted sound sources. A carefully shaped frequency response includes a voice-frequency presence peak and a low-frequency roll-off to compensate for the proximity effect inherent in cardioid mics during close-talk operation.

WH20XLR wired headset microphone includes 3-pin male XLR connector w/ detachable belt clip and 4" cable.

Product Features
  • Lightweight wireframe and elastic headband adjust for a secure, comfortable fit
  • Extra-strong, small-diameter 4" attached microphone cable resists breakage
  • Collapsible microphone boom for easy storage and transportation
  • Smooth, natural frequency response comparable to high-quality dynamic hand-held vocal microphones
  • High input clipping level eliminates overload distortion
  • Reliable at temperature and humidity extremes
  • Supplied foam windscreen and clothing clip
  • 3-pin male XLR connector w/ detachable belt clip

Specifications

Type Dynamic, Close-Talking
Frequency Response (at 8 mm) 50 to 15,000 Hz
Polar Pattern Cardioid (unidirectional) response-uniform with frequency, symmetrical about axis
Impedance Rated at 150 ohms (200 ohms actual)
Output Level (close talked* at 1,000 Hz)
Open Circuit Voltage: -67.0 db/Pa (0.45 m)
1Pa = 94 dB SPL

*At 12.5 mm (1/2 inch)
Hum Sensitivity 38.4 dB equivalent SPL in a 1 millioersted field
Polarity Positive sound pressure on diaphragm produces positive voltage
on pin 2 with respect to pin 3 of microphone output XLR connector.
Environmental Conditions Operating Temperatures: -18° to 60° C (0° to 140°F)
Storage Temperatures: -29° to 74°C (-20° to 165°F)
Humidity: 0 to 95%
Cable Attached 1.22 m (4 ft), small-diameter, shielded, PVC-jacketed, two-conductor.
Cable Connector Three-pin XLR with detachable belt clip
Construction Black thermoplastic housing; stainless steel grille; black TEFLON®-coated stainless steel wireframe;
flexible plastic-clad monel gooseneck; rubber/nylon elastic headband
Net Weight (including connector) 3.5 oz

Customers Who Bought This Item Also Viewed

Camcor.com

Contents of all material on these pages are ©2023 Camcor, Inc. All Rights Reserved.