Vaddio RoboSHOT 12E HDBaseT PTZ Camera with OneLINK HDMI (White)

• RoboSHOT Elite 4K 30E HDBaseT PTZ Camera
• OneLINK HDMI Extension Module
• 1/2.5" Exmor R CMOS Sensor
• 12x Optical Zoom
• Extends Camera Distance up to 328'
• Power, Control, Video, and Streaming
• Outputs up to UHD 4K HDMI Video
• H.264 IP Streaming, IR Forwarding Port
• Control via RS-232, Telnet

The white RoboSHOT 12E HDBaseT PTZ Camera with OneLINK HDMI from Vaddio enables you to extend your camera at distances up to 328'. This pro camera supports up to UHD 4K30 broadcast-quality video and features 12x optical zoom. The OneLINK HDMI module provides bidirectional Ethernet, H.264 IP streaming, and an IR forwarding point.

Vaddio RoboSHOT Elite 4K 12E HDBaseT PTZ Camera (White)

UHD 4K30 Video with HDBaseT Output

Ideal for corporate, training, and educational use, the white RoboSHOT Elite 4K 12E HDBaseT PTZ Camera from Vaddio uses a 1/2.5" type Exmor R to support up to UHD 4K30 broadcast-quality video. It features 12x optical zoom, simultaneous HDMI and HDBaseT output, and multiple control options.

Simultaneous Outputs

The camera's HDMI and RJ45 outputs are active at all times, so there is no need to select one output over another. This enables you to output to more than one display device or recorder at the same time. The built-in IP streaming simplifies streaming your video over a network.

Excellent Image Quality

Constructed with an 1/2.5-type Exmor R CMOS sensor, this RoboSHOT Elite camera produces excellent video image quality. Its cutting-edge image signal processing produces improved light-gathering capabilities, incredible contrast, and sharp UHD 4Kp30 video, even in lower light levels. Wide dynamic range retains details in both darker and overbright areas.

Smooth Motion

The RoboSHOT Elite 4K 12E camera offers silky-smooth motion along all three axes, thanks to Vaddio's next-generation silent motors paired with Tri-Synchronous motion algorithms. 

Optional OneLINK Bridge

Add the separately available OneLINK Bridge receiver to link to a USB stream, add audio, and extend HDBaseT up to 328' via Cat 6 cable.

Control Options

You can control the camera via the included IR remote commander, the RS-232 port, web GUI, or the HDBaseT port.

Vaddio OneLINK HDMI Extension System for HDBaseT Cameras

The Vaddio OneLINK HDMI Extension System for HDBaseT Cameras is an interface that allows you to power, receive HDMI video from, and control your compatible HDBT camera using a single Ethernet cable up to 328' long. The interface connects to your network for control, or you can use an RS-232 controller (not included) instead. HDMI video, up to 1080p60, is transmitted from your HDBT compatible camera to the OneLINK interface, from where it is available over a standard HDMI port.

• Video, power, network, and control on a single Cat5e (or better) cable
• Supports cable runs up to 328'
• Works with RoboSHOT UHD HDBaseT cameras
• Bidirectional control via Ethernet and RS-232
• Transmits and receives HDMI video up to 1080p60