Shure MX418SE/N 18" Standard Gooseneck Condenser Microphone (No Cartridge)

Print Shure MX418SE/N 18" Standard Gooseneck Condenser Microphone (No Cartridge) pageRequest Bulk Pricing CAMCOR ITEM NO. 136017419 | MFG. PART NO. MX418SE/N
Shure MX418SE/N 18
Shure MX418SE/N 18" Standard Gooseneck Condenser Microphone (No Cartridge)
Zoom
Close WindowZoom
Alternate View

MSRP: 286.00
Savings: $82.00

Your Price: $204.00
Quantity

Free ShippingFREE
SHIPPING (?)

This item has Free Shipping!

Camcor, Inc. uses parcel carriers including UPS and FedEx. UPS will NOT deliver to PO Boxes (can only be shipped via US Postal Service). For residential and business orders shipped by motor freight (truck) common carrier, normal delivery is curbside or loading dock (Dock to Dock Delivery) and NOT inside the home or business.

For any special request such as "in home", "inside building", "up elevators", "up stairs", "set up", "lift gate truck", the freight company will assess additional charges. Customers are responsible for any such charges.

Product Highlights
Shure MX418SE/N Microflex® Standard Gooseneck microphone is fully adjustable and designed for easy replacement and flexibility with interchangeable cartridges: Cardioid, Supercardioid, and ... More

Is This Item Right For Me? - Ask Our Experts
Phone 800.868.2462
 
WarningCalifornia Residents:
WARNING: Cancer and reproductive harm - See www.P65Warnings.ca.gov for more information.

Product Description

Shure MX418SE/N Microflex® Standard Gooseneck microphone is fully adjustable and designed for easy replacement and flexibility with interchangeable cartridges: Cardioid, Supercardioid, and Omnidirectional polar patterns are available and can be switched out as needed. MX418SE/N is an excellent choice for use in houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the Microflex product line for enhanced convenience and consistent sound.

MX418SE/N includes 18" In-Line Preamp, Shock & Flange Mount, 10' Side- (or Bottom-) Exit Cable, Snap-Fit Foam Windscreen. Microphone cartridge not included.

Product Features
  • 18" In-Line Preamp
  • 10' Side- (or Bottom-) Exit Cable
  • Snap-Fit Foam Windscreen
  • Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
  • Interchangeable cartridges provide the right polar pattern for every application
  • Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
  • Shock mount provides over 20 dB isolation from surface vibration noise
  • Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables

Specifications

Frequency Response 50 to 17,000 Hz
Output Impedance 180 ohms actual (EIA rated at 150 ohms)
Sensitivity (At 1,000 Hz, open circuit voltage*)
Maximum SPL (1 kHz at 1% THD, 1 kilohm load)
Equivalent Output Noise (A-weighted)
Signal to Noise Ratio (referenced at 94 dB SPL)
Dynamic Range at 1 kilohm load 96.2 dB 100 dB at 0 gain
Common Mode Rejection 45.0 dB minimum
Preamplifier Output Clipping Level (1% THD) -6.0 dBV (0.5 V)
-12 dBV at 0 gain
Polarity Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector
Power Requirements 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F)
Relative Humidity: 0 to 95%

Customers Who Bought This Item Also Viewed

Camcor.com

Contents of all material on these pages are ©2023 Camcor, Inc. All Rights Reserved.